k3lv

iTrader: (12)

looks good as usual Retro! Love your car.

Btw where did you tuck the oil line that usually goes over the wastegate?

reTro

iTrader: (9)

Sounds identical, absolutely NO benefits I can detect... other than bling factor! I ran it today with the recirc line off just for the hell of it, and now you could really hear it vent, but I stalled it a few time coming to a hard stop. Fun was over, it's connected once again.


This year, I swear! I say it every year, but I plan on getting a dyno and a 1/4 mile time before the year's end!


It's there, just running along the top of the radiator with some zippies.

reTro

iTrader: (9)

---Look for an updated photoshoot too my friend took with his new SLR. Herez a teaser:

otter

iTrader: (14)

Get some silver vinyl to at least attempt to cover up those license plate holes.

lanzerralliart

iTrader: (15)

looks nice mush be even more of a blast tot drive....

TwilsonD7

Whats that coming out of the last bend there before the throttle?

reTro

iTrader: (9)

I believe you are referring to the 5th injector? Instead of upgrading the injectors, RRM just added a 5th. Seems to work just fine.


I know what you're saying Otter, but I kinda like the "ratty" look and have no problems leaving behind signs of customizing. Maybe I'll just photoshop them out.

GearDownSon

iTrader: (11)

That looks really nice man.
That smaller battery really takes the "cramped" look out of it.
I think you should have left the mivec silver IMO..

pabboost

iTrader: (3)

nice!

fkdrcrs

i love the exterior shots of your car but i aggree with otter, you should get rid of the original holes in the bumper.

DangerousDan

iTrader: (8)

you guys don't have holes on the bottom of your plates? you could have left it in the center and just let it ride like that

fkdrcrs

that would look stupid if i understand what your trying to say , the pre drilled holes on plates dont match up with the holes in the bumper. thats why the RAs come with that big ugly plastic holder when you buy em new, i had to drill diff holes in the front plate to get it to fit.

DangerousDan

iTrader: (8)

oh, I didn't realize they don't line up with the plate holes

yeah, I was being sarcastic, since I agree that it would look like total ***.

KilltheKing

Very nice man! I like it here in Saskatchewan, Canada...no front plate

joeyj

here in texas the only requirement is plate has to be visible from front, so some cops will let ya get away with it being on your dash, i keep screws and plastic holder just incase the cop is a jerk.

but its nice not to have any plate in the front at all =]