Cylinder Head project !!!
May 29, 2007, 04:08 PM
#107
Evolved Member
Thread Starter
iTrader: (10)
Join Date: Aug 2006
Location: Puerto Rico
Posts: 864
Likes: 0
Received 0 Likes
on
0 Posts
93 all day long
SO an update I called the Machine SHop and the head is due to pick up tomorrow, in a few hours I will post some pics of the valve springs and the retainers to be coated with dry film lubricant..... just a few hours I hope ...
SO an update I called the Machine SHop and the head is due to pick up tomorrow, in a few hours I will post some pics of the valve springs and the retainers to be coated with dry film lubricant..... just a few hours I hope ...
May 29, 2007, 08:03 PM
#109
Evolved Member
Thread Starter
iTrader: (10)
Join Date: Aug 2006
Location: Puerto Rico
Posts: 864
Likes: 0
Received 0 Likes
on
0 Posts
Ok so parts have been coated and left in the oven at work sorry I couldn't take pics but they were closing the shop.I will return tomorrow with lots of energy..
May 30, 2007, 07:17 PM
#111
Evolved Member
Thread Starter
iTrader: (10)
Join Date: Aug 2006
Location: Puerto Rico
Posts: 864
Likes: 0
Received 0 Likes
on
0 Posts
Ok people as promised the cyl head cleaned and milled slightly
CHAMBERS
INTAKE PORTS
Exhaust SIDE
CYL HEAD PLUS FINISHED VALVE COVER
Now some bonus footage
Look who arrived in the mail this morning It looks so suspicious LoL
Some valve train PIcs
CHAMBERS
INTAKE PORTS
Exhaust SIDE
CYL HEAD PLUS FINISHED VALVE COVER
Now some bonus footage
Look who arrived in the mail this morning It looks so suspicious LoL
Some valve train PIcs
Last edited by migueralliart; May 30, 2007 at 07:31 PM.
May 31, 2007, 05:45 AM
#115
Evolving Member
Join Date: May 2007
Location: Toledo, OH
Posts: 152
Likes: 0
Received 0 Likes
on
0 Posts
Migue,
I didn't see the SMT6 wiring diagram in the download section for the 4g69 piggy on perfectpower.com. It looks like you'll need to sniff it out.
I didn't see the SMT6 wiring diagram in the download section for the 4g69 piggy on perfectpower.com. It looks like you'll need to sniff it out.
Last edited by drewbad; May 31, 2007 at 06:15 AM.
May 31, 2007, 07:54 AM
#117
Evolved Member
Thread Starter
iTrader: (10)
Join Date: Aug 2006
Location: Puerto Rico
Posts: 864
Likes: 0
Received 0 Likes
on
0 Posts
I sent the diagrams to a couple of guys who PM'd me but here it is I will attach it to this thread. along with the email the guys from perfect power sent me.
Original Email
Orlando Vega <migueralliart@gmail.com> hide details Mar 3
to info@perfectpower.com
date Mar 3, 2007 11:03 AM
subject mivec lancer 2004 ralliart INSTALLATION DIAGRAMS
mailed-by gmail.com
HI there I recently purchased a smt6 for this car do you have a wiring diagram for it?
They replied
Dear Orlando
Thank you for your enquiry.
In order for us to create a wiring diagram for you, you will need to send us the ECU pin out data of the vehicle.
Please let me know where you are emailing from? If from the USA, please let me know from which state.
Kind regards
Paul
I sent the ECU layout along with all the info from our cars and this was the result .
[ATTACH]SMT6[/ATTACH]
Note to all of you I've already installed this piggy and was working flawlessly I sold it to a guy in PR cause I was traveling to the US and was planning on using the Emanage ultimate but then decided to go back to the smt6. This box is almost the same concept as the one that comes in the RRM TURBO kit. It can advance and retard timing adjust fuel , and also you can adjust CLOSED LOOP . It has a lot of outputs to set up if you want additional injectors , NOS control and shift lights etc.
Original Email
Orlando Vega <migueralliart@gmail.com> hide details Mar 3
to info@perfectpower.com
date Mar 3, 2007 11:03 AM
subject mivec lancer 2004 ralliart INSTALLATION DIAGRAMS
mailed-by gmail.com
HI there I recently purchased a smt6 for this car do you have a wiring diagram for it?
They replied
Dear Orlando
Thank you for your enquiry.
In order for us to create a wiring diagram for you, you will need to send us the ECU pin out data of the vehicle.
Please let me know where you are emailing from? If from the USA, please let me know from which state.
Kind regards
Paul
I sent the ECU layout along with all the info from our cars and this was the result .
[ATTACH]SMT6[/ATTACH]
Note to all of you I've already installed this piggy and was working flawlessly I sold it to a guy in PR cause I was traveling to the US and was planning on using the Emanage ultimate but then decided to go back to the smt6. This box is almost the same concept as the one that comes in the RRM TURBO kit. It can advance and retard timing adjust fuel , and also you can adjust CLOSED LOOP . It has a lot of outputs to set up if you want additional injectors , NOS control and shift lights etc.
Jun 5, 2007, 08:43 PM
#119
I'm bumping this thread because I've been watching it closely and I'm eager to hear how things are, but I also give you credit for all of your hard work and considerate input man. You and Dan and everyone else have been really helpful and friendly. Good on ya.
Jun 5, 2007, 10:22 PM
#120
Evolved Member
Thread Starter
iTrader: (10)
Join Date: Aug 2006
Location: Puerto Rico
Posts: 864
Likes: 0
Received 0 Likes
on
0 Posts
THE PROCESS
FIRST CLEAN THE VALVES ,COAT THEM and BAKE them
THE Result
Then prepare the cyl head for coating and leave it in the oven @ work
Bonus Footage!!!
I am still receiveing nebulous stuff in the mail look at this SO SUSPICIOUS
Sorry I am taking a little time to update the reason for this is that I am pretty busy at work working 60 hours a week and still trying to make this come true it's almost done , so people please be patient and in the meantime post your questions and doubts so we can comment on this project....
FIRST CLEAN THE VALVES ,COAT THEM and BAKE them
THE Result
Then prepare the cyl head for coating and leave it in the oven @ work
Bonus Footage!!!
I am still receiveing nebulous stuff in the mail look at this SO SUSPICIOUS
Sorry I am taking a little time to update the reason for this is that I am pretty busy at work working 60 hours a week and still trying to make this come true it's almost done , so people please be patient and in the meantime post your questions and doubts so we can comment on this project....