Help! Flywheel bolts are too short?? 06 ralliart
#76
whiteline suspension parts are available in north america from many retailers, and Quaife is in the UK, but their diffs are available here as well...
for the head studs, i used ARP, but any high strength aftermarket head studs designed for racing application will work...what you want is 11mm 4g63 head studs...same as all 7-bolt motors.
for LSD's your choices are Quaife, Wavetrac or RTM racing's LSD conversion unit (similar to phantom grip)...as far as i know, OBX and Kaaz never made one for this transmission.
for the head studs, i used ARP, but any high strength aftermarket head studs designed for racing application will work...what you want is 11mm 4g63 head studs...same as all 7-bolt motors.
for LSD's your choices are Quaife, Wavetrac or RTM racing's LSD conversion unit (similar to phantom grip)...as far as i know, OBX and Kaaz never made one for this transmission.
So it looks like Road Race Motorsports has taken care of everything for me regarding the flywheel problem. CM has already sent out the new one and RRM covered the shipping cost I had to pay to send back the wrong one.
I'm going to start a progress thread on the swap soon - might even go and get myself a better camera (as the one on my phone isn't so great) and I've wanted a camera for a long time - this might be a good enough reason to now get one to take some clear shots of the progress.
#77
For anyone interested I've created this progress thread for my OZ rally to Ralliart swap:
https://www.evolutionm.net/forums/al...gine-swap.html
https://www.evolutionm.net/forums/al...gine-swap.html
#79
Evolving Member
iTrader: (2)
Join Date: Mar 2011
Location: Ontario
Posts: 492
Likes: 0
Received 0 Likes
on
0 Posts
to anyone stuck doing this on your won its really difficult to lift the tranny, rotate it, operate the jack, and fight to allign everything by yourself. If you can get 1-2 others youll be ok, if you stick on your own like i was i higly recommend this little unit http://www.princessauto.com/pal/prod...ission-Adapter
its not the best built little unit but it did make the job a hell of a lot easier, also if you not satisfied money back :P, more importantly if your own you own it will allow you to do the job and be done in a day easy
its not the best built little unit but it did make the job a hell of a lot easier, also if you not satisfied money back :P, more importantly if your own you own it will allow you to do the job and be done in a day easy
#88
Evolved Member
iTrader: (1)
http://www.lancerproject.ca/lancerproject_2.htm
#89
Evolved Member
iTrader: (1)
https://www.belmetric.com/bh12x125x2...th=506_510_411
Thanks.
#90
Evolved Member
iTrader: (1)
Would you still have needed to cut the bolts with a class 10.9 M12x1.25x25MM as in this link ?
https://www.belmetric.com/bh12x125x2...th=506_510_411
Thanks.
https://www.belmetric.com/bh12x125x2...th=506_510_411
Thanks.