rrm piggyback
#16
EvoM Guru
iTrader: (26)
Wait a minute... you have an 03 lancer not a ralliart according to your sig.
Your pulling a 15.5 at 88-89 with the 03lancer??
Your mods say a custom magnaflow exhaust, injen cai intake, kamakazi header/downpipe, and high flow car... is this correct. Forgive me but isn't that time one of the fastest if not the fastest out there?? Your trapping speeds that should be close to 15flats and edging into 14's.
I'm a bit confused here... is all this true or are you pulling our legs?
Your pulling a 15.5 at 88-89 with the 03lancer??
Your mods say a custom magnaflow exhaust, injen cai intake, kamakazi header/downpipe, and high flow car... is this correct. Forgive me but isn't that time one of the fastest if not the fastest out there?? Your trapping speeds that should be close to 15flats and edging into 14's.
I'm a bit confused here... is all this true or are you pulling our legs?
#17
Former Sponsor
iTrader: (67)
Join Date: Dec 2001
Location: Santa Fe Springs, CA.
Posts: 7,826
Likes: 0
Received 3 Likes
on
3 Posts
I called you yesterday. I will call you later today. Asking for help here is not going to do much good. We will figure it out. As for h.p., Piggy alone was good for bigger, flatter powerband and 6 more peak h.p. so I know it works. 1/4 mile times are hard, hard ,hard to use for testing a product cause there are way too many variables to getting good time. Like launch! With no LSD you just dig holes for longer period of time with the extra power. We will talk today.
ROAD/RACE
ROAD/RACE
#20
Evolved Member
iTrader: (7)
Join Date: Jan 2004
Location: Pennsylvania
Posts: 1,037
Likes: 0
Received 0 Likes
on
0 Posts
Well stop driving it i had some confusion when i first installed mine and i did'nt notice a difference, call RRM and send them pics of all your wireing thats what i did and they walked me threw it. I only had one wire misplaced and after that it worked like a charm.
#22
Newbie
Thread Starter
Join Date: Oct 2003
Location: Hillsboro, OR
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
i doooo have a ralliart, i used to have a oz, but i traded it in, i have a hollowed out catback exhaust, and cold air intake, i did not feel any gain at all when i installed the piggyback, all the wires match up, except for the tac wire, it says that the brown and green wire is in the second pin from the left on the 3rd connector, in the middle row, on mine it is the third pin from the left
#27
Newbie
Thread Starter
Join Date: Oct 2003
Location: Hillsboro, OR
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
im just gonna send it back and let them test it to see if it actually works, if it doesnt, ill get a new one, but if it does, i dont deserver to have it in my car if i cant put it in right, so ill have to settle with the down pipe
#28
EvoM Guru
iTrader: (26)
thomasman... you've installed what... uhhhh... one ralliart piggy back!
Don't ever think you can jump me when i'm just trying to help. You don't even know how many "I Hooked it up right's" i've heard. Then they say well i couldn't find that wire where you said it was so i just went here. Well that's WRONG!!
Deal with it how you will but calling in to RRM is your best bet. They'll take care of you. As far as i'm concerned i don't care how much you've built or what you've done your still wrong if your not connecting it how it said it should be... whether it's an instruction thing or your connection. If the wire wasn't were it said it should have been you should have stopped and called in.
Don't go off on me due to your own arrogance with dealing with this.
Don't ever think you can jump me when i'm just trying to help. You don't even know how many "I Hooked it up right's" i've heard. Then they say well i couldn't find that wire where you said it was so i just went here. Well that's WRONG!!
Deal with it how you will but calling in to RRM is your best bet. They'll take care of you. As far as i'm concerned i don't care how much you've built or what you've done your still wrong if your not connecting it how it said it should be... whether it's an instruction thing or your connection. If the wire wasn't were it said it should have been you should have stopped and called in.
Don't go off on me due to your own arrogance with dealing with this.