No problems at all. And yea I'd recommend it if you aint pushing out major power. if your below 225-240 tq the stage one CM will handle it ok. Anything more than 250, it can handle it, but it wont take much abuse. I burnt my CM clutch out @ 7psi in 2 months. than bought the ACT stage 3, and took years of abuse at 10 and 13 PSI

 

On the clutch masters website fw-045-3al is for the oz lancer.

 

i recieved my clutch but it didnt come with any bolts. was it supposed to? will the come with the flywheel? the instructions told me i should get metric grade 10.9 or sae grade 8. id rather have metrics just cuz everything else is metric on the car. where can i these? ive been doing some searching and ive not really had any luck.

 

Try ARP. If that dowesn't work, any big garage (maybe dealership) has a bolt supplier (here in Canada it's Wurth everywhere). They could order them through their fastener supplier.

 

The flywheels come with the bolts, not the clutch. Clutches come with TOB, spline tool, some lube stuff, and pressure plate.

 

Thanx guys

 

Ok sry guys I've been burning up questions I know but just wanna make sure I get running and stay that way. Our upper clutch lines are solid right not rubber? I found the works ss and rrm time attack line. I have read about rrm having a lower line on here but on the site it saya theirs bypasses the slave cylinder so i called and rrm said they don't carry the lower lines. Were can I find lower line?

 

The lines are the least of your worries. You should be more concerned with replacing your stock clutch master cylinder.

 

I am doin that I also think ika gut the restrictor

 

Ralliart610, did you ever order your flywheel?

 

Not yet, I did order my clutch though. I ordered it from clutchflywheel.com but didnt get any type of tracking number yet. I'll probably order the flywheel within the next 2 weeks. Its just too cold in Pa to do anything right now. Im ready for spring.

 

Yeah I think we just got our last snow its gonna be in the fifties all week so hells yeah. the ppl will send an email telling you to send the your invoice number from the invoice pdf they send you and then they tell when it comes. A stupid deal goin on there but I got my clutch in like a week and a half. So are goin with 06 eclipse flywheel? Acording to rrm the oz rally FW fits ra's but the don't have the right part number on that website. I'm so torn on this stupid ordeal

 

Yea when i order it, im ordering the eclipse flywheel

 

You can just buy my flywheel.

 

What flywheel do you have and why dont you want it?

Turboart
How long was it before you got a tracking number? I emaild them twice and still havent gotten one. I ordered it on 2/3. I think I'll be getting my flywheel somewhere else.