cokeandrum01

Just recently I had two rear tires replaced due to them running bald near the inner side wall. I put my RA on a rack at work and emmidiately checked the alignment. I noticed right away that my rear camber is maxed out and still in the negative. I checked with RRM to see if they have a rear camber kit available with no such luck. I DO have aftermarket Tien S Tech springs and KYB GR2 struts all the way around. But I have had these mod's for over a year and have never had a problem like this. So if you can drop me any idea's besides having the frame pulled I would appreciate it very much.

otter

iTrader: (14)

Something is wrong and it's not related to your springs/struts. A bushing in one of the control arms is likely shot.

cokeandrum01

......You know what I was thinking that too last night. I am getting alot of noise coming from the rear end lately. I guess I will throw it back on the rack and check all the bushings out when I get a chance.

bruce988jl

iTrader: (56)

Yea I have the same problem in back. My camber settings never changed yet i have some pretty bad neg camber on the rear driverside, as shown to me by my tires.. lol

Looks like I'll be replacing some bushings as well :-/

kaoscage

iTrader: (4)

lol, Ditto. Replacing my bushing when I get paid.