Well after looking through this forum, I decided to make the ralliart a project car for my son and I. Some work will be done at home and some will be done at a shop. Either way here is a list of what I have and what I will be getting. I will also try to include pictures when I can.





IMPORTANT
~Upgraded Fuel Relays!
~Idler Pulley Upgrade!

Tuning
~Tuned at Kozmic Motorsports
~EvoScan & EcuFlash & Tactrix 2.0
~Grimspeed 3-port ebcs

Suspension
~BC Coilovers RAM Type w/ Rear Extenders & 8k Front and Rear Swift Springs
~Whiteline Swaybars (Front 26" and Rear 24") and rear diffs mount bushing, Laterial Locks for Front Swaybar, Front Sway Bar Links, Front Lower Control Arm Bushings, Front Control Arm Bushings
~CV Boots replaced and used Amsoil Grease, Tie Rod End and Steering boot replaced
~Evo X Front End links for the Rear
~Rims - XXR-522 18x9.5 Chromium Black
~Tires - Michelin Pilot Super Sport 255/40ZR18XL
~Rear Camber Arms Adjustable (RealTune)
~Rear Toe Links (RealTune)

Engine
~Evo X Turbo
`ETS UICP & LICP, 5" Intercooler and Air Intake
~Synapse DV
~Evo X spark plugs
~FID Front motor mount
~Mil.Spec 64mm TB
~Driven Fab Catch Can

Fuel System
~FIC 1100 High Impedence Injectors
~Bomba Fuel Rail
~Kozmic Fuelkit Walbro450
~MAP AFPR Hose Kit w/ Turbosmart FPR

Transmission
~SSP 500 Clutch Pack and Seals
~Transmission Cooler w/ Fan - Custom Built

Exhaust
~AMS Widemouth Downpipe
~ETS HFC
~Borla Catback Exhaust
~Vibrant Resonator
~MAP Investment Exhaust Manifold

Others
~Rear Battery Relocation
~Black Window Door trims to replace the Chrome ones
~Weathertech All Weather Mats (Black)
~Tinted Windows
~PIAA 500HZ + 600HZ Sports Horn
~Anzo USA 121428 Black Halo Projector Headlight

Sound
~Pioneer AVH-X2800BS
~American International Dash Kit
~Polk Audio DB651 6.5" & DB6501
~Rockford Fosgate Twisted Pair 20-Feet Signal Cable
~Rockford Fosgate P3D4-10 Punch
~Planet Audio AC1800.5 ANARCHY
~MicroBypass ALL AVH-X
~10-Inch Single Sealed Subwoofer Enclosure
~License Plate Car Rear View Camera
~14 Gauge AWG RED/BK Speaker Wire
~PAC SWI-RC Steering Wheel Contrl

BodyKit
~SSP Evo X Aluminum Under Tray
~Evo X Body Kit Illuzion front bumper
~Evo X Look Rear Bumper: 106955 Duraflex
~Evo X GT Concept Front Fenders : 104641
~Evo X Look Rear Fender Flares (4-pieces): 106957 Duraflex
~Evo X Look Side Skirts: 106954 Duraflex
~2008-2011 OEM Window Sun Visors
~Custom Wind Spliter
~Front Carnards

Future Mods:
~Rebuilt Engine - Not sure yet what I will do.
~GSC S2 Cams, and head ported by HeadGames Motorworks 4B Pocket Port “R” Package 031 or something similar to this.
~Kozmic Motorsports Rebuilt Transmission.
~EFR Turbo.

 

https://www.evolutionm.net/forums/at...d-img_2999.jpg

https://www.evolutionm.net/forums/at...d-img_3003.jpg

It would not let me repost these pics

How the car looks now was done by the previous owner.

 

I love the front.

 

Good luck man. Get an exhaust on that thing!! X-)

 

I'd paint the mesh black, then it would super clean

 

Yea, I can't wait to get the exhaust. Will probably get the Borla first then the rest of the exhaust stuff.

 

I agree, also need to take a picture of it's assets. The body kit he put on hides my mufflers Might be the reason I don't have a picture right now...

 

I like the bumper on that body kit, VERY CLEAN!
Oh and I don't think AMI is making the pillar mounts any more (I would like one as well)
For the rear sway, pcick-up end-links from Racing Line, I've already blown sets of stockers w/ the 26mm (once on soft, the other on medium). Order the Evo X front endlinks, fully adjustable for the RA rear

EDIT: To clarify I mean the body kit you put up the link for, not the one on the car. The one on the car is ok, but the linked one is

 

I hate to upload these pics but it had to be done. The previous owner used a regular lancer body kit and not one for the ralliart.

 

That really does not work with the muffler

 

TThe main reason I want to change the full body kit! Few other stuff but the rear end pisses me off...

 

Good project. I hope when my son is older tge RA can become our project. On a side note this thread proly belongs in the show and shine section.

 

Is that the stock exhaust, "modified for fit" by having an oranutang swing on the tips?

That's classic. Imagine the head-scratching by the previous owner when the rear spoiler didn't fit, followed by "I've GOT it!"...

Rich

 

wow the rear bumper and diffuser actually looks good imo...see if you can extend your tips out when you get your system man

 

As far as tuners go, in TX, you're relatively in luck since SSP just opened up a shop down there, iirc. I say relatively since I don't know exactly where and it is quite a large state (duh) but if I were there, it'd be worth the drive either way...that's definitely the place to go!!

Also, +1 on painting the mesh black. Would clean it up very nicely.