Notices
09+ Lancer Ralliart General Discuss any generalized technical factory turbocharged Ralliart related topics that may not fit into the other forums.

Need a Control Arm and Knuckle

Thread Tools
 
Search this Thread
 
Old Nov 11, 2011 | 10:34 AM
  #1  
Krisko's Avatar
Thread Starter
Evolving Member
iTrader: (3)
 
Joined: Nov 2010
Posts: 194
Likes: 0
From: Dallas, TX
Need a Control Arm and Knuckle

As the title reads, I am in dire need of a control arm and knuckle. I don't mind a used or new one. Does anyone have one or know a shop that may have one for a ralliart 2010. I hit a large pot hole that screwed up the alignment of my front right tire
Old Nov 11, 2011 | 12:43 PM
  #2  
sstevojr's Avatar
Evolved Member
iTrader: (7)
 
Joined: Sep 2010
Posts: 2,558
Likes: 0
From: 805-Conejo Valley
ebay, I see OEM parts all the time from junk yards
Old Nov 12, 2011 | 12:12 AM
  #3  
Krisko's Avatar
Thread Starter
Evolving Member
iTrader: (3)
 
Joined: Nov 2010
Posts: 194
Likes: 0
From: Dallas, TX
Tried that. They only sale ones for the older ralliart, which apparently fits normal lancers and evo 8-9. Does the 2010 RA have its own kind?
Old Nov 13, 2011 | 05:22 PM
  #4  
sstevojr's Avatar
Evolved Member
iTrader: (7)
 
Joined: Sep 2010
Posts: 2,558
Likes: 0
From: 805-Conejo Valley
Check with performance shops for used parts (i.e. AWD, Bushur, RRE, etc); I'm sure new thru Mitsu would be a pretty penny...
Old Nov 13, 2011 | 05:24 PM
  #5  
sstevojr's Avatar
Evolved Member
iTrader: (7)
 
Joined: Sep 2010
Posts: 2,558
Likes: 0
From: 805-Conejo Valley
Or for new parts:
http://MitsubishiCyberStore.com
25% off plus an extra 5% with 'socalevo' code.
Hope that helps, good luck!
Old Nov 13, 2011 | 05:26 PM
  #6  
bigmiketino's Avatar
Newbie
iTrader: (10)
 
Joined: Feb 2009
Posts: 75
Likes: 0
From: New Jersey
Not sure if the X is the same.......https://www.evolutionm.net/forums/sa...-force-dp.html
Old Nov 13, 2011 | 05:34 PM
  #7  
sstevojr's Avatar
Evolved Member
iTrader: (7)
 
Joined: Sep 2010
Posts: 2,558
Likes: 0
From: 805-Conejo Valley
It's not, but thank you




All times are GMT -7. The time now is 12:23 PM.