'Maintenance Required' alert
#1
Newbie
Thread Starter
Join Date: Mar 2010
Location: Toronto
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
'Maintenance Required' alert
I finally had enough with my dealership's service department and decided to take it to Midas. They did a good job, except that even after the service, the "Maintenance Required" alert stills come on when I turn the car on. I took it back to them and they didn't know how to get rid of it. They even went through the manual.
So, how do you get rid of the maintenance required alert?
So, how do you get rid of the maintenance required alert?
#3
Newbie
Thread Starter
Join Date: Mar 2010
Location: Toronto
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Yes, there is a reset option under the settings menu (which I was able to find a few times, and at other times I failed because it's not one of the options!! I think it comes only if you press that black button next to the speedometer early enough, but I'm not sure). However, that didn't really do anything. I suspect it's only for resetting the settings (like language, units of measurement, etc.).
#5
Newbie
Thread Starter
Join Date: Mar 2010
Location: Toronto
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
The alert? In the middle screen: http://www.shiftblitz.com/wp-content...er-800x531.jpg
#6
Former Sponsor
iTrader: (8)
Originally Posted by TheBlackBeast
I stopped by the dealer. Here are the basic steps to turn it off (its not word for word as I'm going from memory):
Turn off ignition completely
Ensure drivers door is closed completely
Press the "Info" button on the instrument panel
Go to the Maintenance option and hold "Info" down to access it
Repeatedly press "Info" to get the word "Clear" to display on the instrument panel
Hold down the "Info" button to clear the maintenance timer
All done!
Turn off ignition completely
Ensure drivers door is closed completely
Press the "Info" button on the instrument panel
Go to the Maintenance option and hold "Info" down to access it
Repeatedly press "Info" to get the word "Clear" to display on the instrument panel
Hold down the "Info" button to clear the maintenance timer
All done!
Trending Topics
#10
Newbie
Thread Starter
Join Date: Mar 2010
Location: Toronto
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
tsitalon1
Evo X Electrical / Audio / Security
1
Feb 15, 2011 09:47 AM
go_dlee
Evo X How Tos / Installations
3
Aug 24, 2010 11:07 PM