I have a 2010 Ralliart and when i log runs with evoscan i notice that the max my TPS idicates is 86.XXX%. Is there something i didnt set right on evoscan or is it something else. Trying to mess with virtual dyno but keeps saying "No WOT detected". i can edit the logs so that Virtual Dyno thinks its at WOT but idk if it truely is. Is there a way to see if its opening all the way. i would think that it not opening all the way would mean im missing out on some of my cars power.

 

ok well in virtual dyno what kind of numbers are u getting and hows ur other settings?

 

All the logs i edit to work in virtual dyno keep putting me at either
156HP 160TQ at 3500rpm (defenitly not right)
or
415hp 408TQ at 4000rpm (i dont think that my mods would equal that)
both in 3rd gear and i havnt messed with smoothing yet will do so when i have my netbook that has all the logs.

 

hmm well with a stock car with just a basemap it shows mine at 213hp 266tq not sure they r correct but prolly close but in my log it shows th TPS to slowly decrease as the rpms rise so i think it may be the winter mats but gonna take them out and run some more loggs tomorrow

 

im running the gst v2.6 pill map if that helps solve the issue

 

hope its a custom basemap but our settings for 2010 and the 2011 are defernet but they these and see what u get

 

In X and RA, your WOT will be "86%" to "87%" when logging.

That's normal.

Rich

 

thanks Rich was about to pm you about this

 

Thx for the info glad thats normal
Now i just have to verify all my setting are right in virtual dyno.

 

soo every time i do my runs for virtual dyno i keep getting around 350hp at 5000RPM... i did about 20 runs and the lowest one was 331HP 4786RPM the highest was 357HP 5866RPM. just wanted to actually put a number up for the ones that wanted to know.