install FMIC and all piping, also synapse dv.
#22
any extra help w/ install of vac. lines to synapse bov would help, the synapse engineering peeps could of supplied split connectors and better instructions too.im about ready to send it back and get a simple agency power or turbosmart dual port.problem is i have ams sr w/ bungs will need more vac. line i guess.
#24
Evolving Member
Join Date: Feb 2009
Location: Phoenix, AZ
Posts: 195
Likes: 0
Received 0 Likes
on
0 Posts
I have the UR intercooler and it seems to pull harder at high RPMs
but i went to the drag strip and got the same #'s
stock w/flash ( no boost pill) i ran best of 13.7 and consistant 13.9 but this was back in February temp was 50 Degrees
I went this last saturday and got consistant 13.7 but it was 102 Degrees,
but i went to the drag strip and got the same #'s
stock w/flash ( no boost pill) i ran best of 13.7 and consistant 13.9 but this was back in February temp was 50 Degrees
I went this last saturday and got consistant 13.7 but it was 102 Degrees,
#25
Evolving Member
iTrader: (1)
Join Date: Apr 2009
Location: Winnipeg, MB
Posts: 181
Likes: 0
Received 0 Likes
on
0 Posts
I have the UR intercooler and it seems to pull harder at high RPMs
but i went to the drag strip and got the same #'s
stock w/flash ( no boost pill) i ran best of 13.7 and consistant 13.9 but this was back in February temp was 50 Degrees
I went this last saturday and got consistant 13.7 but it was 102 Degrees,
but i went to the drag strip and got the same #'s
stock w/flash ( no boost pill) i ran best of 13.7 and consistant 13.9 but this was back in February temp was 50 Degrees
I went this last saturday and got consistant 13.7 but it was 102 Degrees,
Seems that helped then, you'd probably be in the 14's with the stock FMIC
#26
Evolving Member
Join Date: Feb 2009
Location: Phoenix, AZ
Posts: 195
Likes: 0
Received 0 Likes
on
0 Posts
#29
Evolving Member
Join Date: Feb 2009
Location: Phoenix, AZ
Posts: 195
Likes: 0
Received 0 Likes
on
0 Posts