hks bov
#1
Evolving Member
Thread Starter
Join Date: Jan 2009
Location: ottawa
Posts: 134
Likes: 0
Received 0 Likes
on
0 Posts
hks bov
Does anybody have this mod done, how was the install. I just got mine but there were no instructions. My guess is that this is going to be pretty straightforward. But just in case, any tips or things to watch out for..thank you
#4
It's really easy, I've installed the Tial one but it's the same stuff.
You remove the hose between the intake and the Diverter Valve from both end
.
You cap the hole on the intake with the plug they provided.
You remove the diverter valve and you unplug the vacuum hose connected to the nipple on top of the valve.
You put the BOV in that same spot and you plug back the vacuum hose.
That's basicaly it.
I removed mine and sold it because it was creating compressor surge, not sure what the HKS will do. The air fluttering when you lift your foot at part throttle might sound cool but it's bad. I installed back the original valve and there's not fluttering part or full throttle.
You remove the hose between the intake and the Diverter Valve from both end
.
You cap the hole on the intake with the plug they provided.
You remove the diverter valve and you unplug the vacuum hose connected to the nipple on top of the valve.
You put the BOV in that same spot and you plug back the vacuum hose.
That's basicaly it.
I removed mine and sold it because it was creating compressor surge, not sure what the HKS will do. The air fluttering when you lift your foot at part throttle might sound cool but it's bad. I installed back the original valve and there's not fluttering part or full throttle.
#5
Yea I added the racing single valve hks bov myself. The o ring is the only *****. Get heavy duty clamps lol. Oh and if it doesn't come with the flange kit, you'll need to buy it. I love mine. Doesnt give me any problems. And can handle up to 48 lbs of boost which is ridiculous for any RA.
#6
Evolved Member
iTrader: (4)
Yea I added the racing single valve hks bov myself. The o ring is the only *****. Get heavy duty clamps lol. Oh and if it doesn't come with the flange kit, you'll need to buy it. I love mine. Doesnt give me any problems. And can handle up to 48 lbs of boost which is ridiculous for any RA.
Thread
Thread Starter
Forum
Replies
Last Post
andrewzaragoza
North Texas Evo Club (NTEC)
2
Jul 1, 2009 08:46 PM
brokeblueevo8
EvoM New Member / FAQs / EvoM Rules
12
May 1, 2008 12:15 AM