AMS Lancer Ralliart with and FP Red installed... SST loves it!
#1
Former Sponsor
Thread Starter
iTrader: (9)
Join Date: Aug 2006
Location: West Chicago, IL
Posts: 651
Likes: 0
Received 0 Likes
on
0 Posts
AMS Lancer Ralliart with and FP Red installed... SST loves it!
After putting the EVO X turbo on the Ralliart for a while with good success we hooked up with Forced Performance and decided to throw their venerable FP Red on it!
Many people are very anxious about the ability of the SST to hold up to upgraded power levels. We are very curious what it will be able to handle as well.
The AMS Ralliart current has installed on it:
AMS UICP
AMS FMIC
AMS Down pipe back exhaust
AMS Intake
AMS Boost Pill
AMS Small Battery Kit
AMS Prototype SST transmission cooler kit
AMS Custom Tune using ECUTeK
FP Red Turbo
DW 800cc injectors
After a bit of rescaling tables that previously never needed to be touched on the GSR's or the other MR's with smaller turbos, I got it tweaked out to the numbers seen below. This is using the factory single solenoid boost control system and one of our boost pills as well. Boost hits about 24-25psi and only drops to about 22 by redline.
The car now makes over 150whp more than it did from the factory. With the help of our friends at ECUTeK we now also have the ability to firm up the shifts on the SST, which helps it slip less when changing gears and also heat up the fluid less. It *MAY* increase the clamp load, but I am not 100% sure on that yet. Currently our SST transmission is showing no signs of slippage at all when under power.
I am very pleased with the results. This turbo makes about 60 more whp than the stock turbo did in the higher RPM range, which is exactly what I would expect from and upgrade like this.
Many people are very anxious about the ability of the SST to hold up to upgraded power levels. We are very curious what it will be able to handle as well.
The AMS Ralliart current has installed on it:
AMS UICP
AMS FMIC
AMS Down pipe back exhaust
AMS Intake
AMS Boost Pill
AMS Small Battery Kit
AMS Prototype SST transmission cooler kit
AMS Custom Tune using ECUTeK
FP Red Turbo
DW 800cc injectors
After a bit of rescaling tables that previously never needed to be touched on the GSR's or the other MR's with smaller turbos, I got it tweaked out to the numbers seen below. This is using the factory single solenoid boost control system and one of our boost pills as well. Boost hits about 24-25psi and only drops to about 22 by redline.
The car now makes over 150whp more than it did from the factory. With the help of our friends at ECUTeK we now also have the ability to firm up the shifts on the SST, which helps it slip less when changing gears and also heat up the fluid less. It *MAY* increase the clamp load, but I am not 100% sure on that yet. Currently our SST transmission is showing no signs of slippage at all when under power.
I am very pleased with the results. This turbo makes about 60 more whp than the stock turbo did in the higher RPM range, which is exactly what I would expect from and upgrade like this.
#3
Evolved Member
iTrader: (5)
Join Date: Nov 2008
Location: Ramstein Ab
Posts: 1,376
Likes: 0
Received 0 Likes
on
0 Posts
AMS, simply amazing.
I would love to see track/drag vids.
looks like it will be more beneficial to keep it in manual and shift at 7.5k
since the sports mode will prob shift it at 6ish.
I would love to see track/drag vids.
looks like it will be more beneficial to keep it in manual and shift at 7.5k
since the sports mode will prob shift it at 6ish.
Last edited by GiLizILL; Jul 16, 2009 at 08:39 AM.
Trending Topics
#8
Evolving Member
Join Date: May 2009
Location: Tucson, AZ
Posts: 475
Likes: 0
Received 0 Likes
on
0 Posts
That's great Chris! Good results and I'm sure the SST guys are happy as well. Now, with increasing the torque numbers, do you expect the SST to still hold up as well?
#14
Evolved Member
Join Date: Dec 2008
Location: michigan
Posts: 662
Likes: 0
Received 0 Likes
on
0 Posts
Very nice. It'll will be interesting to find out if clamping loads are affected. Some after market tuner company is going to have to eventually crack open the SST and find out precisely what is going on in there. As for keeping it under 300WTQ, was that just a safety precaution for now? As usual, good work, AMS!
#15
Evolved Member
iTrader: (1)
That's friggin awesome... thats exactly what my local tuner told me would have been possible by swapping the stock for an FPRed; Gregory from Machines Gone Wild (MGW) he told me he knows u guys over there... is that right Chris?
Well those are indeed some sweet numbers.... the TQ being so low, im assuming you guys don't want to smash the SST right? how about increasing the TQ slowly but steady and see the results?
Well those are indeed some sweet numbers.... the TQ being so low, im assuming you guys don't want to smash the SST right? how about increasing the TQ slowly but steady and see the results?