2009 Lancer Ralliart - GST Basemap
Nov 30, 2012, 10:27 AM
#3706
Newbie
Join Date: Dec 2008
Location: Edmonton, AB
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Not sure it evolves... Could clearing the P050B code with EvoScan be telling the ECU to hide the CEL?
Code:
;----------------mrmacan evox---------------- ; log channel settings type=mrmacan ;-------------options---------------- zerosampletime = 1 fillmissingsamples = 0 ;-------------parameters------------- paramname=2ByteRPM paramid=0x80874E databits=16 scalingrpn=x,1000,*,256,/ paramname=PSIG paramid=0x808722 databits=16 scalingrpn=x,0.0483675,*,14.5,- paramname=TimingAdv paramid=0x808A0F scalingrpn=x,20,- paramname=KnockSum paramid=0x808A53 scalingrpn=x paramname=Load paramid=0x808776 databits=16 scalingrpn=x,10,*,32,/ paramname=IPW paramid=0x80A974 databits=16 scalingrpn=x,1000,/ paramname=APP paramid=0x80950D scalingrpn=x,32,-,0.5059,* paramname=TPS paramid=0x808701 scalingrpn=x,100,*,256,/ sampgroup=1 paramname=Speed paramid=0x8087EF scalingrpn=x,2.0478,* sampgroup=2 paramname=WGDC_Active paramid=0x808B5B scalingrpn=x,2,/ sampgroup=1 paramname=IdleLTFT paramid=0x804573 scalingrpn=x,0.1953125,*,25,- sampgroup=2 paramname=CruiseLTFT paramid=0x804575 scalingrpn=x,0.1953125,*,25,- sampgroup=2 paramname=IAT paramid=0x808659 scalingrpn=x,1.8,*,40,- sampgroup=2 paramname=MAT paramid=0x808661 scalingrpn=x,1.8,*,40,- databits=16 sampgroup=2 paramname=ECT paramid=0x808647 scalingrpn=x,1.8,*,40,- sampgroup=2 paramname=CoolantTS paramid=0X80863F scalingrpn=x,1.8,*,40,- paramname=Battery paramid=0x8086EF scalingrpn=x,18.75,*,255,/ ;paramname=CruiseLight ;paramid= 0x8045C5(incorrect) ;databits=1 ;offsetbits=5 ;isvisible=0 ;sampgroup=1 ;conditionrpn = CruiseLight,1,== ;action = start ;conditionrpn = CruiseLight,0,== ;action = stop
Dec 1, 2012, 10:26 AM
#3708
Evolved Member
iTrader: (2)
Join Date: Feb 2008
Location: Paris, TN
Posts: 1,904
Likes: 0
Received 0 Likes
on
0 Posts
they'll be in this thread. In order for there to be a 2013 BaseMap ROM they'll need a copy of a stock 2013 ROM. So, when you get your Tactrix OpenPort2.0 you may need to use it to get a copy of the stock ROM to get it to Rich or who ever else is helping him maintain these.
Dec 1, 2012, 06:45 PM
#3709
Newbie
Join Date: Oct 2012
Location: Costa Mesa, California
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
Dec 2, 2012, 10:51 PM
#3711
Newbie
Join Date: Nov 2012
Location: Massachusetts
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Just picked up my 2013 RA in California (South Coast / Hunting Beach Mitsubishi). Going to be driving it back to Massachusetts. If you need the RA ROM I can try to find someone with the cable / software to swing by on my way.
Last edited by Rogean; Dec 2, 2012 at 11:01 PM.
Dec 3, 2012, 12:48 PM
#3713
Cheers sir!
Since you asked nicely, I ran out into the cold to get it for you.
Not sure it evolves... Could clearing the P050B code with EvoScan be telling the ECU to hide the CEL?
Not sure it evolves... Could clearing the P050B code with EvoScan be telling the ECU to hide the CEL?
Code:
;----------------mrmacan evox---------------- ; log channel settings type=mrmacan ;-------------options---------------- zerosampletime = 1 fillmissingsamples = 0 ;-------------parameters------------- paramname=2ByteRPM paramid=0x80874E databits=16 scalingrpn=x,1000,*,256,/ paramname=PSIG paramid=0x808722 databits=16 scalingrpn=x,0.0483675,*,14.5,- paramname=TimingAdv paramid=0x808A0F scalingrpn=x,20,- paramname=KnockSum paramid=0x808A53 scalingrpn=x paramname=Load paramid=0x808776 databits=16 scalingrpn=x,10,*,32,/ paramname=IPW paramid=0x80A974 databits=16 scalingrpn=x,1000,/ paramname=APP paramid=0x80950D scalingrpn=x,32,-,0.5059,* paramname=TPS paramid=0x808701 scalingrpn=x,100,*,256,/ sampgroup=1 paramname=Speed paramid=0x8087EF scalingrpn=x,2.0478,* sampgroup=2 paramname=WGDC_Active paramid=0x808B5B scalingrpn=x,2,/ sampgroup=1 paramname=IdleLTFT paramid=0x804573 scalingrpn=x,0.1953125,*,25,- sampgroup=2 paramname=CruiseLTFT paramid=0x804575 scalingrpn=x,0.1953125,*,25,- sampgroup=2 paramname=IAT paramid=0x808659 scalingrpn=x,1.8,*,40,- sampgroup=2 paramname=MAT paramid=0x808661 scalingrpn=x,1.8,*,40,- databits=16 sampgroup=2 paramname=ECT paramid=0x808647 scalingrpn=x,1.8,*,40,- sampgroup=2 paramname=CoolantTS paramid=0X80863F scalingrpn=x,1.8,*,40,- paramname=Battery paramid=0x8086EF scalingrpn=x,18.75,*,255,/ ;paramname=CruiseLight ;paramid= 0x8045C5(incorrect) ;databits=1 ;offsetbits=5 ;isvisible=0 ;sampgroup=1 ;conditionrpn = CruiseLight,1,== ;action = start ;conditionrpn = CruiseLight,0,== ;action = stop
Dec 6, 2012, 04:50 AM
#3715
Newbie
Join Date: Oct 2010
Location: Mooresville, NC
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Dec 6, 2012, 05:30 PM
#3718
Evolving Member
Join Date: May 2010
Location: Oakville, ON
Posts: 315
Likes: 0
Received 0 Likes
on
0 Posts
Dec 6, 2012, 05:37 PM
#3719
Evolving Member
Join Date: Jun 2009
Location: Calgary, AB
Posts: 353
Likes: 0
Received 0 Likes
on
0 Posts
Ok guys, let's get this straight once and for all, what triggers the P050B code is having a HFC installed and starting up the car in cold weather and driving it without first letting it warm up. I've confirmed that this is the issue after weeks of testing with my own car. The only time that I EVER got the P050B code was the ONE AND ONLY time that I started my car in the cold and drove off quickly without letting it sit there and idle for a few minutes to warm it up. Every single time I've let the car warm up for about 3 minutes before putting it in drive and taking off I've NEVER ONCE gotten the code. Try it for yourself and you'll see that I'm right. Three minutes warmup time is about average, you might need a minute or two more if it's extremely cold outside, or you might only need 1-2 minutes of warmup time if it's relative mild weather.
