2009 Lancer Ralliart - GST Basemap
#3723
Evolving Member
Join Date: Jun 2009
Location: Calgary, AB
Posts: 353
Likes: 0
Received 0 Likes
on
0 Posts
God I loved Ren and Stimpy. I'll see what I can do, it stopped on its own now that it has stayed cold. Gotta wait for a few days of warmth before another cold snap then I can. Log that is.
#3725
Hey guys, I just flashed the ignition timing map from a 2012 on my 2009 engine... I was curious as to why the '12s had such advance idle timing compared to earlier years. I had read elsewhere that it resulted in greater induction vacuum at idle, and some pseudo/placebo effects of a smoother or more quiet idling. Anyone running advanced idle timing on an earlier model RA? What's your results? Should I be expecting anything different? I'm hesitant to claim smoother idle as it could be entirely placebo and I hadn't paid much attention to idle quality beforehand. But it feels as if nothing much has changed.
#3728
Hey guys, I just flashed the ignition timing map from a 2012 on my 2009 engine... I was curious as to why the '12s had such advance idle timing compared to earlier years. I had read elsewhere that it resulted in greater induction vacuum at idle, and some pseudo/placebo effects of a smoother or more quiet idling. Anyone running advanced idle timing on an earlier model RA? What's your results? Should I be expecting anything different? I'm hesitant to claim smoother idle as it could be entirely placebo and I hadn't paid much attention to idle quality beforehand. But it feels as if nothing much has changed.
I've tried ignition more than 16 - RPM is not stable, but the fuel consumption is reduced.
#3729
Newbie
Join Date: May 2011
Location: Huntington Beach
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
HALP!
When flashing the new map I get a "The image you are trying to flash contains changes to protected areas! Interface close" message in the task info pane. What does this mean?
When flashing the new map I get a "The image you are trying to flash contains changes to protected areas! Interface close" message in the task info pane. What does this mean?
Last edited by Day; Dec 7, 2012 at 04:13 PM.
#3731
Newbie
Join Date: May 2011
Location: Huntington Beach
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
I when I read the ECU I get an Unknown Rom image message stating "ECU Flash could not recognize this ROM image using any of the current definitions. You can choose one of the following options.
Abort using this ROM image
Continue with this ROM image with no definition
Use wizard to create new definition
Abort using this ROM image
Continue with this ROM image with no definition
Use wizard to create new definition
#3732
Newbie
Join Date: May 2011
Location: Huntington Beach
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
Yay. Got it to read. ROM ID file is 55590006
I also have a boost pill.
SCRATCH THAT. EDIT.
To blow up this thread even further, I have gotten everything to work, new map is flashed, old one is saved, all is well in my universe. and Rich, you are one rad dude!!
I also have a boost pill.
SCRATCH THAT. EDIT.
To blow up this thread even further, I have gotten everything to work, new map is flashed, old one is saved, all is well in my universe. and Rich, you are one rad dude!!
Last edited by Day; Dec 7, 2012 at 05:25 PM.
#3735
Newbie
Join Date: Oct 2012
Location: Costa Mesa, California
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts