2009 Lancer Ralliart - GST Basemap
Dec 29, 2012 | 12:38 AM
#3781
Yeah, boost pill should be the same.
Easy to install. Well, not totally easy the first time. Mine now takes about 60 seconds, no blood and no swearing, lol.
Make sure you log. Check peak boost. Boost targets are 22.4psi on 91oct and 23.3psi on 93oct.
Get a wideband, if you haven't already. You should see mixtures around 11.5:1 - 11.0:1 at WOT at/past peak boost.
Rich
Easy to install. Well, not totally easy the first time. Mine now takes about 60 seconds, no blood and no swearing, lol.
Make sure you log. Check peak boost. Boost targets are 22.4psi on 91oct and 23.3psi on 93oct.
Get a wideband, if you haven't already. You should see mixtures around 11.5:1 - 11.0:1 at WOT at/past peak boost.
Rich
Jan 7, 2013 | 06:54 PM
#3786
Evolved Member
Joined: Oct 2010
Posts: 2,447
Likes: 14
From: Australia
Jan 8, 2013 | 11:39 PM
#3789
Newbie
Joined: Jun 2012
Posts: 2
Likes: 0
From: Sydney
Sorry to post this again but when I click on the 2009 Stock RA + BoostPill V3.0 link is sends me to this page
http://norcalmotorsports.org/users/b...on_V30.007.hex
Unfortunately it keeps saying that "Sorry, the page you were looking for could not be found"
Im not sure if its my connection but why can i not download the file? Btw I am in Aus so if there is anyone here in Aus that isnt getting this same page then pls let me know how so i can download this map.
Thanks in advance.
http://norcalmotorsports.org/users/b...on_V30.007.hex
Unfortunately it keeps saying that "Sorry, the page you were looking for could not be found"
Im not sure if its my connection but why can i not download the file? Btw I am in Aus so if there is anyone here in Aus that isnt getting this same page then pls let me know how so i can download this map.
Thanks in advance.
Jan 10, 2013 | 08:08 PM
#3791
Newbie
Joined: May 2012
Posts: 7
Likes: 0
From: guelph
hey guys i have been lurking for a while and doing my reading i got my tactrix cable on monday and held off on trying on uploading the GST base map for my 09 until i felt i read enough. now earlier to day i went to try and get things done and i have run into trbl... who would have thought.
i am unable to read the stock rom, i have been searching and reading on this issue and re-attempted to read the rom with no luck.
below is the log from when i tried to read the rom. i followed:
https://www.evolutionm.net/forums/09...f-dummies.html
this guide and i still managed to get this wrong some how...
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'Courier'; font-size:8pt; font-weight:400; font-style:normal;">
[14:23:01.874] EcuFlash Version 1.44.3719</p>
[14:23:01.874] OS Version Windows (unknown version)</p>
[14:23:01.874] Qt Version 4.8.0</p>
[14:23:01.886] 63 memory models read.</p>
[14:23:01.886] scanning for metadata models in C:/Program Files (x86)/OpenECU/EcuFlash/rommetadata</p>
[14:23:04.501] 611 ROM metadata models scanned.</p>
[14:23:04.501] checksum module "subarudbw" loaded.</p>
[14:23:04.501] checksum module "mitsucan" loaded.</p>
[14:23:04.501] checksum module "mitsuh8" loaded.</p>
[14:23:04.501] patch module "Subaru CAN Enhanced RAM Parameter Logging" loaded.</p>
[14:23:04.501] patch module "Mitsu CAN RAM Parameter Logging" loaded.</p>
[14:23:04.503] flashing tool "wrx02" loaded.</p>
[14:23:04.505] flashing tool "wrx04" loaded.</p>
[14:23:04.507] flashing tool "sti04" loaded.</p>
[14:23:04.509] flashing tool "sti05" loaded.</p>
[14:23:04.509] flashing tool "mitsukernel" loaded.</p>
[14:23:04.509] flashing tool "mitsukernelocp" loaded.</p>
[14:23:04.509] flashing tool "mitsubootloader" loaded.</p>
[14:23:04.509] flashing tool "shbootmode" loaded.</p>
[14:23:04.522] flashing tool "shaudmode" loaded.</p>
[14:23:04.524] flashing tool "subarucan" loaded.</p>
[14:23:04.526] flashing tool "subarucand" loaded.</p>
[14:23:04.528] flashing tool "mitsucan" loaded.</p>
[14:23:04.546] J2534 API Version: 04.04</p>
[14:23:04.546] J2534 DLL Version: 1.00.3719 Dec 28 2012 23:38:48</p>
[14:23:04.546] Device Firmware Version: 1.12.3688</p>
[14:23:04.546] Device Serial Number: TAhspBW5</p>
[14:23:04.546] interface close</p>
[14:23:04.573] J2534 API Version: 04.04</p>
[14:23:04.573] J2534 DLL Version: 1.00.3719 Dec 28 2012 23:38:48</p>
[14:23:04.573] Device Firmware Version: 1.12.3688</p>
[14:23:04.573] Device Serial Number: TAhspBW5</p>
[14:23:04.574] interface close</p>
[14:23:04.588] J2534 API Version: 04.04</p>
[14:23:04.588] J2534 DLL Version: 1.00.3719 Dec 28 2012 23:38:48</p>
[14:23:04.588] Device Firmware Version: 1.12.3688</p>
[14:23:04.588] Device Serial Number: TAhspBW5</p>
[14:23:04.589] interface close</p>
[14:55:18.865] using metadata XML ID read_mitsum32186f8can from file C:/Program Files (x86)/OpenECU/EcuFlash/rommetadata/read templates/read_mitsum32186f8can.xml</p>
[14:55:18.882] J2534 API Version: 04.04</p>
[14:55:18.882] J2534 DLL Version: 1.00.3719 Dec 28 2012 23:38:48</p>
[14:55:18.882] Device Firmware Version: 1.12.3688</p>
[14:55:18.882] Device Serial Number: TAhspBW5</p>
[14:56:03.487] -- loading kernel --</p>
[14:56:03.487] -- connecting to kernel --</p>
[14:56:03.487] kernel get version</p>
[14:56:03.813] ECU HW part number : 1860B106</p>
[14:56:03.838] ECU SW part number : 1860B10601</p>
[14:56:03.858] VIN : JA3AV66V09U6076**</p>
[14:56:03.861] -- unlocking ECU --</p>
[14:56:03.861] starting session...</p>
[14:56:04.142] requesting seed...</p>
[14:56:04.147] sending key...</p>
[14:56:04.157] no key(s) worked - perhaps this ECU has been intentionally locked?</p>
[14:56:04.157] interface close</p>
[14:56:04.169] interface close</p></body></html>
sorry that prob looks like crap but it y give some of you smart people something to go by. i edited out the first few rows the were identical to each and made it even harder to read, i can paste the whole file if needed and i took out the last 2 vin digits which i can add again if needed.
hell of what i think is a first post, sorry but thanks in advance for any tips or pointers.
Chris
i am unable to read the stock rom, i have been searching and reading on this issue and re-attempted to read the rom with no luck.
below is the log from when i tried to read the rom. i followed:
https://www.evolutionm.net/forums/09...f-dummies.html
this guide and i still managed to get this wrong some how...
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'Courier'; font-size:8pt; font-weight:400; font-style:normal;">
[14:23:01.874] EcuFlash Version 1.44.3719</p>
[14:23:01.874] OS Version Windows (unknown version)</p>
[14:23:01.874] Qt Version 4.8.0</p>
[14:23:01.886] 63 memory models read.</p>
[14:23:01.886] scanning for metadata models in C:/Program Files (x86)/OpenECU/EcuFlash/rommetadata</p>
[14:23:04.501] 611 ROM metadata models scanned.</p>
[14:23:04.501] checksum module "subarudbw" loaded.</p>
[14:23:04.501] checksum module "mitsucan" loaded.</p>
[14:23:04.501] checksum module "mitsuh8" loaded.</p>
[14:23:04.501] patch module "Subaru CAN Enhanced RAM Parameter Logging" loaded.</p>
[14:23:04.501] patch module "Mitsu CAN RAM Parameter Logging" loaded.</p>
[14:23:04.503] flashing tool "wrx02" loaded.</p>
[14:23:04.505] flashing tool "wrx04" loaded.</p>
[14:23:04.507] flashing tool "sti04" loaded.</p>
[14:23:04.509] flashing tool "sti05" loaded.</p>
[14:23:04.509] flashing tool "mitsukernel" loaded.</p>
[14:23:04.509] flashing tool "mitsukernelocp" loaded.</p>
[14:23:04.509] flashing tool "mitsubootloader" loaded.</p>
[14:23:04.509] flashing tool "shbootmode" loaded.</p>
[14:23:04.522] flashing tool "shaudmode" loaded.</p>
[14:23:04.524] flashing tool "subarucan" loaded.</p>
[14:23:04.526] flashing tool "subarucand" loaded.</p>
[14:23:04.528] flashing tool "mitsucan" loaded.</p>
[14:23:04.546] J2534 API Version: 04.04</p>
[14:23:04.546] J2534 DLL Version: 1.00.3719 Dec 28 2012 23:38:48</p>
[14:23:04.546] Device Firmware Version: 1.12.3688</p>
[14:23:04.546] Device Serial Number: TAhspBW5</p>
[14:23:04.546] interface close</p>
[14:23:04.573] J2534 API Version: 04.04</p>
[14:23:04.573] J2534 DLL Version: 1.00.3719 Dec 28 2012 23:38:48</p>
[14:23:04.573] Device Firmware Version: 1.12.3688</p>
[14:23:04.573] Device Serial Number: TAhspBW5</p>
[14:23:04.574] interface close</p>
[14:23:04.588] J2534 API Version: 04.04</p>
[14:23:04.588] J2534 DLL Version: 1.00.3719 Dec 28 2012 23:38:48</p>
[14:23:04.588] Device Firmware Version: 1.12.3688</p>
[14:23:04.588] Device Serial Number: TAhspBW5</p>
[14:23:04.589] interface close</p>
[14:55:18.865] using metadata XML ID read_mitsum32186f8can from file C:/Program Files (x86)/OpenECU/EcuFlash/rommetadata/read templates/read_mitsum32186f8can.xml</p>
[14:55:18.882] J2534 API Version: 04.04</p>
[14:55:18.882] J2534 DLL Version: 1.00.3719 Dec 28 2012 23:38:48</p>
[14:55:18.882] Device Firmware Version: 1.12.3688</p>
[14:55:18.882] Device Serial Number: TAhspBW5</p>
[14:56:03.487] -- loading kernel --</p>
[14:56:03.487] -- connecting to kernel --</p>
[14:56:03.487] kernel get version</p>
[14:56:03.813] ECU HW part number : 1860B106</p>
[14:56:03.838] ECU SW part number : 1860B10601</p>
[14:56:03.858] VIN : JA3AV66V09U6076**</p>
[14:56:03.861] -- unlocking ECU --</p>
[14:56:03.861] starting session...</p>
[14:56:04.142] requesting seed...</p>
[14:56:04.147] sending key...</p>
[14:56:04.157] no key(s) worked - perhaps this ECU has been intentionally locked?</p>
[14:56:04.157] interface close</p>
[14:56:04.169] interface close</p></body></html>
sorry that prob looks like crap but it y give some of you smart people something to go by. i edited out the first few rows the were identical to each and made it even harder to read, i can paste the whole file if needed and i took out the last 2 vin digits which i can add again if needed.
hell of what i think is a first post, sorry but thanks in advance for any tips or pointers.
Chris
Last edited by hirev_chris; Jan 13, 2013 at 03:04 PM.
Jan 10, 2013 | 11:29 PM
#3792
Evolving Member
Joined: Sep 2011
Posts: 175
Likes: 0
From: Sydney
This is mine.
[17:06:43.797] EcuFlash Version 1.44.3719
[17:06:43.797] OS Version Windows 7
[17:06:43.797] Qt Version 4.8.0
[17:06:43.797] 63 memory models read.
[17:06:43.797] scanning for metadata models in C:/Program Files (x86)/OpenECU/EcuFlash/rommetadata
[17:06:44.172] 615 ROM metadata models scanned.
[17:06:44.172] checksum module "subarudbw" loaded.
[17:06:44.172] checksum module "mitsucan" loaded.
[17:06:44.172] checksum module "mitsuh8" loaded.
[17:06:44.172] patch module "Subaru CAN Enhanced RAM Parameter Logging" loaded.
[17:06:44.172] patch module "Mitsu CAN RAM Parameter Logging" loaded.
[17:06:44.172] flashing tool "wrx02" loaded.
[17:06:44.172] flashing tool "wrx04" loaded.
[17:06:44.172] flashing tool "sti04" loaded.
[17:06:44.172] flashing tool "sti05" loaded.
[17:06:44.172] flashing tool "mitsukernel" loaded.
[17:06:44.172] flashing tool "mitsukernelocp" loaded.
[17:06:44.172] flashing tool "mitsubootloader" loaded.
[17:06:44.172] flashing tool "shbootmode" loaded.
[17:06:44.172] flashing tool "shaudmode" loaded.
[17:06:44.172] flashing tool "subarucan" loaded.
[17:06:44.172] flashing tool "subarucand" loaded.
[17:06:44.172] flashing tool "mitsucan" loaded.
[17:06:44.172] error loading FTD2XX.DLL
[17:07:13.610] 53610013 (172 tables) inheriting RAX53610013 (12 tables)
[17:07:13.610] using metadata XML ID 53610013 from file C:/Program Files (x86)/OpenECU/EcuFlash/rommetadata/mitsubishi/evo/53610013 2009 EDM Lancer Ralliart SST.xml which inherits XML ID RAX53610013 from file C:/Program Files (x86)/OpenECU/EcuFlash/rommetadata/mitsubishi/evo/53610013 RAX Patch.xml
[17:07:13.657] 1048576 byte image read.
your one is reading defs from readtemp dir?
-edit-
oh wait ur reading from ecu.. need to plug into car and have a look.
[17:06:43.797] EcuFlash Version 1.44.3719
[17:06:43.797] OS Version Windows 7
[17:06:43.797] Qt Version 4.8.0
[17:06:43.797] 63 memory models read.
[17:06:43.797] scanning for metadata models in C:/Program Files (x86)/OpenECU/EcuFlash/rommetadata
[17:06:44.172] 615 ROM metadata models scanned.
[17:06:44.172] checksum module "subarudbw" loaded.
[17:06:44.172] checksum module "mitsucan" loaded.
[17:06:44.172] checksum module "mitsuh8" loaded.
[17:06:44.172] patch module "Subaru CAN Enhanced RAM Parameter Logging" loaded.
[17:06:44.172] patch module "Mitsu CAN RAM Parameter Logging" loaded.
[17:06:44.172] flashing tool "wrx02" loaded.
[17:06:44.172] flashing tool "wrx04" loaded.
[17:06:44.172] flashing tool "sti04" loaded.
[17:06:44.172] flashing tool "sti05" loaded.
[17:06:44.172] flashing tool "mitsukernel" loaded.
[17:06:44.172] flashing tool "mitsukernelocp" loaded.
[17:06:44.172] flashing tool "mitsubootloader" loaded.
[17:06:44.172] flashing tool "shbootmode" loaded.
[17:06:44.172] flashing tool "shaudmode" loaded.
[17:06:44.172] flashing tool "subarucan" loaded.
[17:06:44.172] flashing tool "subarucand" loaded.
[17:06:44.172] flashing tool "mitsucan" loaded.
[17:06:44.172] error loading FTD2XX.DLL
[17:07:13.610] 53610013 (172 tables) inheriting RAX53610013 (12 tables)
[17:07:13.610] using metadata XML ID 53610013 from file C:/Program Files (x86)/OpenECU/EcuFlash/rommetadata/mitsubishi/evo/53610013 2009 EDM Lancer Ralliart SST.xml which inherits XML ID RAX53610013 from file C:/Program Files (x86)/OpenECU/EcuFlash/rommetadata/mitsubishi/evo/53610013 RAX Patch.xml
[17:07:13.657] 1048576 byte image read.
your one is reading defs from readtemp dir?
-edit-
oh wait ur reading from ecu.. need to plug into car and have a look.
Last edited by tencents; Jan 10, 2013 at 11:34 PM. Reason: mistake
Jan 11, 2013 | 07:23 AM
#3793
[14:55:18.865] using metadata XML ID read_mitsum32186f8can from file C:/Program Files (x86)/OpenECU/EcuFlash/rommetadata/read templates/read_mitsum32186f8can.xml</p>
looks like a bad xml
or
Did you set up ECU user privileges?
looks like a bad xml
or
Did you set up ECU user privileges?
Jan 11, 2013 | 07:50 AM
#3794
Newbie
Joined: Oct 2012
Posts: 77
Likes: 0
From: Costa Mesa, California
Not an expert at all, but doesn't the XML file need to be named the same as his ROM ID?
When I read my ROM I downloaded every XML I could. Although it didn't matter I guess as there currently isn't definitions for the 2013 so I don't know.....
When I read my ROM I downloaded every XML I could. Although it didn't matter I guess as there currently isn't definitions for the 2013 so I don't know.....
Jan 12, 2013 | 02:52 PM
#3795
Newbie
Joined: May 2012
Posts: 7
Likes: 0
From: guelph
Hey guys thanks for the thoughts, when i try and read from the ecu thats the log file i get. I cant even see the rom id from the car cause it wont allow me to read the ecu. The part that worries me is where it says its locked towards the end, and is there a way that i havent found to set up the ecu privileges?