2009 Lancer Ralliart - GST Basemap
#4021
Evolving Member
Join Date: Feb 2013
Location: Brampton Ontario
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
#4023
Evolving Member
Join Date: Feb 2013
Location: Brampton Ontario
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
Well the flash is done with the stock pill till I get my pill.
Seems to be ok :P
I can really notice a bit difference.
Going to the track tomorrow so we will test it out :P
My best fully stock is 14.6 sec
Now i have the base map and LC and SS so we will see how it goes
My buddy is bringing his Tatrix and we will log while i do the 1/4 mile see how it looks
I will post the results!
Seems to be ok :P
I can really notice a bit difference.
Going to the track tomorrow so we will test it out :P
My best fully stock is 14.6 sec
Now i have the base map and LC and SS so we will see how it goes
My buddy is bringing his Tatrix and we will log while i do the 1/4 mile see how it looks
I will post the results!
Last edited by RALLI||||||RAT; Jun 14, 2013 at 10:23 AM.
#4024
So, a little bit of an issue. Tuned my car using the 93 octane map and now I'm in an area where I can only get 91. I am almost 2000 miles from my Tactrix cable and computer.... How much of an issue will I have as long as I don't get all crazy on the gas pedal? It's only for about two weeks.
#4025
Evolved Member
iTrader: (7)
Stay away from WOT and keep out of boost as much as possible and you'll be alright.
You can buy some of that over-the-counter octane booster, if you want, but it really doesn't make that much of a difference. Just baby the car until you can refuel with 93 or reflash to a 91 tune.
You can buy some of that over-the-counter octane booster, if you want, but it really doesn't make that much of a difference. Just baby the car until you can refuel with 93 or reflash to a 91 tune.
#4028
Anyonr knows uf the boost pilk version is going to come out for 2013. Rich said he was about to like 2 weeks ago...does he need more datalog. I am running the stock pill rom now and works very well. I can datalog if necessary
#4031
Newbie
iTrader: (1)
Join Date: Mar 2008
Location: Newbury Park, CA
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
If I wanted to data log my 2013 with stock boostpill and gst maps to help out, what should I log?
And thanks Rich!
____nevermind____ It's been a while since I read the first post. Alas, there was my answer
And thanks Rich!
____nevermind____ It's been a while since I read the first post. Alas, there was my answer
Last edited by basher519; Jun 27, 2013 at 04:06 AM.
#4032
Evolved Member
First release of 2013 Boostpill Base Maps, 91oct & 93oct
Hi folks!
It's out... right now.
Here ya go! Two new Base Maps. Boost Pill 2013. Attached to this post (see at bottom).
For logging, please use EvoScan. Put it in "RAX Fast Logging" mode. That should get a whole lotta data.
When it comes to Base Maps v31.003, RAX Fast Logging is already built in. You don't need to "apply" it to the ROM, as I've done all the hard work for ya. But if you want to check out the thread related to this logging method, see here.
Please test cautiously. No rushing off to the drags and setting new land speed records.
If you're not 100% clear on how to LOG AND TEST something like this SAFELY, don't proceed. Ask. Discuss. Save your engine.
Once these are confirmed "working as intended", I'll tweak them for the TBE and TBE+AEM variants. And then we'll have a glorious "first post update" party.
Cheers!
Rich
[Attachments Removed] - so people do not test this without a wideband fitted
Here ya go! Two new Base Maps. Boost Pill 2013. Attached to this post (see at bottom).
For logging, please use EvoScan. Put it in "RAX Fast Logging" mode. That should get a whole lotta data.
When it comes to Base Maps v31.003, RAX Fast Logging is already built in. You don't need to "apply" it to the ROM, as I've done all the hard work for ya. But if you want to check out the thread related to this logging method, see here.
Please test cautiously. No rushing off to the drags and setting new land speed records.
If you're not 100% clear on how to LOG AND TEST something like this SAFELY, don't proceed. Ask. Discuss. Save your engine.
Once these are confirmed "working as intended", I'll tweak them for the TBE and TBE+AEM variants. And then we'll have a glorious "first post update" party.
Cheers!
Rich
[Attachments Removed] - so people do not test this without a wideband fitted
Last edited by richardjh; Jun 30, 2013 at 04:14 PM.
#4035
Thank you rich. Going to install that right away and datalog. Do you actually use a dyno with a 2013 ralliart to do that?is there that much of an improvement with the tbe and intake?