When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
So I changed the paramname=2ByteRPM to paramname=RPM as you said and voilą... It worked!!! Bryan... You are my hero!!! I apologize for the times I freaked out and posted crap that barely made sense. Thank you Bryan!!!
omg i have the same problem as the one you so you delete the number 2 and thats it?
I deleted the "2byte", from paramname=2ByteRPM so that it reads paramname=RPM and problem solved. Big thank to Byan and Rick and the rest of the guys who helped!
i actual found evoscan 6 on somwhere else and finally found the ecuflash on tactrix, i might finally flash car, i was worried about how safe it was but have not really seen anyone have problems with tunes. mime is a 2012.
Hi, i was just wondering how much power difference would I expect from the 91 map vs the 93 map. Ive been running the 91 map for TBE and intake. Also I was wondering would i get quite a bit of gains if i got it custom dyno tuned.
Hi, i was just wondering how much power difference would I expect from the 91 map vs the 93 map. Ive been running the 91 map for TBE and intake. Also I was wondering would i get quite a bit of gains if i got it custom dyno tuned.
You'll only gain another 5-15 hp and torque by dyno-tuning it.
Do you have the basemaps saved already? If so, you can select the third option there "Use Wizard to create..." and select the 2009 basemap and pick inherit values or something like that, and you might be able to read your map and get your file value that way to verify which basemap is compatible.
Edit: I said basemap, but I meant definition file. Use the wizard to pick the definition file closest to your car and see if it matches up and reads your file. I had to do the same thing with my 2014 Ralliart... I used the wizard to inherit the values from the 2013 and once I did that, I could read my file.
Last edited by echo4papa; May 24, 2015 at 01:48 PM.
Just save it as a normal .hex file without any inheriting and upload it to goldenevo.com and it will spit out the ROM ID.
I read it too late and started wizard and inherrited to 53600008... then uploaded to goldenevo.com, in both cases I got ID 53590008 and now I can see all my data in EcuFlash. I guess it is my backup ROM. How to choose which one I need to upload?
Soo I'm new here , and I just found out about the GST tune recently but my question is this I already put some basic mods on my 2011 Ralliart like Evo X bov, CPE Catback, HKS High flow. I want to use the 93 GST+boost pill map. My question is does anyone run a similar setup like this with no issues? Or should I go with Cobb? Thanks
just wanted to say thank you, uploaded the 93 map with tbe and pill. The car feels smooth and i also like the increased mpg getting and extra mpg on the highway
May 11, 2015, 07:21 PM
