Pave

Bryan:

What xml I need for my car??
I have to re-install my ecuflash, and now it needs that correct xml.

I have 2009 EDM Ralliart

Thanks again!

richardjh

I believe that your EDM is the same as mine (AUS), namely 53610010.

There are a few XMLs about. There's one here...

http://goldenevo.com/

...and I posted up an old one here a while back...

https://www.evolutionm.net/forums/09...f-dummies.html

I have a more recent one, with lots of new stuff in it, but it's not quite ready to be shared! I'll sort that out asap...


Bryan posted up a link to a valid XML too, but I can't find it at the moment.

Hope that helps.

Rich

Pave

Yes, it helps.

Thanks Rich!

Airboy

Thanks for the files. I am not sure if I am doing this right as I am seeing several tables that seem to be "off". I used the xml files linked above as well as the evo10base file in the same directory.

Psycho09RA

It could be that you have the user programming preferences in ECU flash set to Beginner. This will cause some tables to be non-editable but still visible. Try changing that preference first to see if that allows you to "turn on" those tables.

RazorLab

iTrader: (8)

Yea some of the tables are defined incorrectly still. You can flash the basemap just fine, just don't try and edit those tables.

I tried to clean up some of them (delete them from the XML for now) but obviously some slipped by.

pfctmitsubishi

OMG!!!!!! So did the stock pill flash few minutes ago and OMG!!! amazing!!!! I like how when you wot it doesnt pick the next gear at 6k and instead just spools and goes!!!!! soooo smooth too. almost to smooth. haha. Will be doing the boostpill flash when I get the pill in the mail!!! Thank you Brian, I seriously owe you!!!!

Airboy

Thanks for the info. Should have before/after dyno plots next week, once the owner gets the boost pill.

npham455

iTrader: (1)

Yup, I'll be on the dyno as soon as the pill arrives

RazorLab

iTrader: (8)

Glad you are happy with the basemap!

sstevojr

iTrader: (7)

Hey Bryan,
Do you have the ID, EVAL, etc for Lean Spool (2010 RA, -90006)? Want to check this out relative to AFR's.
Thanks

RazorLab

iTrader: (8)

I'm not sure I understand your question?

Are you looking to turn off/on Lean Spool or?

sstevojr

iTrader: (7)

Im sorry, too many thoughts in my head. I was working in EvoScan for a minute...
Yeah I'm looking for the address for lean spool to turn it off

RazorLab

iTrader: (8)

ECU Options Set #3

Bit.0

1 = On
0= Off

sstevojr

iTrader: (7)

Awesome, thought I needed a definition to access this, even better!
Appreciate it!