can you please try this for you ses P0420


<table name="Enable catalytic monitoring (P0420)" category="Misc" address="503BC" type="1D" scaling="Hex8"/>

write that in you xml load and change your bit to a zero and see if you get the cel

im now 1000 miles and clear

so i need someone willing to apply it to their car that currently has the cel and see if it comes on again,

if this works we can say atleast the 2010's have p0420 fix and than we can get looking into 09

 

Very interested in this as well!

 

Would this be the same for an 09RA? If so I have P0420 and could give it a shot.

 

we would need to double check the reference code

 

I would love to get rid of P0420 and P0133 from my TP. Do I just need to post up my ROM ID to see if this will be compatable?

 

P0420 Delete works great on my car even attempted to make it go off using a torch on, using compressed air, putting it in water nothing made this bad boy click on

 

Wanted to see if the UR TP extension/o2 spacer would work for not setting off a CEL. Well after driving it tonight it set it off. So i tried this fix and am going to drive it the next few days and see if t fixes the problem. So far so good.

 

So are you still CEL free?

 

yah im still CEL free and i by no means drove the car nicely today

 

So far so good for me today as well We will see how this goes. I know i got a CEL without this fix in the 1st 50 miles... I guess its safe to say the spacer on the UR test pipe doesn't fix the CEL but hopefully this will be the cure!

 

Still CEL free and have drove the car on a 4 hour road trip and out on the weekend doing some spirited driving i guess you could say I believe this is THE FIX!!

 

well almost a week so yah mark it down. !!!! mod's wheres out ralliart tuning sub forum so we can stick crap like this

 

I agree there needs to be a Ralliart tuning forum... And i also agree this should be a sticky as no more annoying CEL light if running a test pipe is 100% worth a sticky IMO

 

So how can I try this out on my 09 RA? I have all the software and a tactrix cable. I've just never got into editing the XML files, I tried following the guide in the X forums awhile back but none of the numbers were matching up so I gave up.

 

first thing we need to know the proper address, does anyone know if the mut address table is the same for 09 ralliart/GSR as it is for 2010??

ill write a quick how to tonight