what's needed to get a 300whp ralliart
Nov 18, 2010, 04:19 AM
#1
Evolving Member
Thread Starter
iTrader: (2)
Join Date: Nov 2010
Location: shreveport, la
Posts: 214
Likes: 0
Received 0 Likes
on
0 Posts
what's needed to get a 300whp ralliart
I know some of you guys out there have done it. What kind of mods am i looking at to reach this goal and should i also be looking to include beefing up the tranny once i get there?
thanks
thanks
Nov 18, 2010, 04:55 AM
#2
Evolved Member
Join Date: May 2009
Location: Eastern NC
Posts: 844
Likes: 0
Received 0 Likes
on
0 Posts
To get 300whp you are going to have to upgrade to a bigger turbo. Most people go with an evox because they are cheap and plentiful, but there are a bunch of other options out there as well.
Nov 18, 2010, 08:27 AM
#4
Bigger turbo, yup. And you're also going to have to catch that wascally wabbit before you look to hit 300awhp. If you're going to be passing 300awtq, I'd consider some SSP clutchpacks. Otherwise you should be fine if you limit torque to under 300.
Keep in mind that 300awtq is just a general, safe number. There have been others that have passed it without beefing up the tranny and have had fine results.
Keep in mind that 300awtq is just a general, safe number. There have been others that have passed it without beefing up the tranny and have had fine results.
Nov 18, 2010, 12:06 PM
#6
yeah bigger turbo is given but i think you can do 290 to the wheels or closer with this bolt on and reflash mods
* 3" TBA
* downpipe
* midpipe
* SRI
* bigger FMIC
* UICP & LICP
* Cobb AP
* BOV cause our plastic bpv leaks after 14psi
* Boost pill
* Tune
say bye bye to your warranty
* 3" TBA
* downpipe
* midpipe
* SRI
* bigger FMIC
* UICP & LICP
* Cobb AP
* BOV cause our plastic bpv leaks after 14psi
* Boost pill
* Tune
say bye bye to your warranty
Trending Topics
Nov 18, 2010, 01:24 PM
#10
