Need help, I installed the AMS intercooler, look @ pic
#1
Evolving Member
Thread Starter
Join Date: Dec 2009
Location: Houston, TX
Posts: 242
Likes: 0
Received 0 Likes
on
0 Posts
Need help, I installed the AMS intercooler, look @ pic
Installed the AMS intercooler, after a week of it being on I noticed this, look @ pic. The screw from the underbody is bumping into my Front mount apparently while im driving, I hope this wont cause an issue down the road. Boost doesn't run through that lower channel does it?
This is happening on both sides
This is happening on both sides
Last edited by 2010 Rallihead; Dec 31, 2010 at 10:31 AM.
#2
Evolved Member
Did you try asking someone at AMS? There an employee from their company on this website. You can reach him here and send a private message if you want. Here's a link to his profile:
https://www.evolutionm.net/forums/me...ericj-ams.html
https://www.evolutionm.net/forums/me...ericj-ams.html
Last edited by Slee256; Dec 31, 2010 at 10:42 AM.
#3
Evolving Member
Thread Starter
Join Date: Dec 2009
Location: Houston, TX
Posts: 242
Likes: 0
Received 0 Likes
on
0 Posts
Did you try asking someone at AMS? There an employee from their company on this website. You can reach him here and send a private message if you want. Here's a link to his profile:
https://www.evolutionm.net/forums/me...ericj-ams.html
https://www.evolutionm.net/forums/me...ericj-ams.html
#6
Evolving Member
Thread Starter
Join Date: Dec 2009
Location: Houston, TX
Posts: 242
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#8
Evolving Member
Thread Starter
Join Date: Dec 2009
Location: Houston, TX
Posts: 242
Likes: 0
Received 0 Likes
on
0 Posts
had a filter but went back to stock, cause the aftermarket filter's maf housing was ****, cause the MAF kept bouncing Though I've seen ppl make great power with the mods i have, plus using the stock intake, supposedly it has great flow, like our stock Downpipe
#9
Account Disabled
Join Date: Sep 2010
Location: Up North
Posts: 389
Likes: 0
Received 0 Likes
on
0 Posts
cool story, its still not a "mod"
And the stock filter is GARBAGE, not sure where you got the info from.
There are quite a few intakes on the market that don't have **** maf housings, ams, UR, injen to namea few.
And the stock filter is GARBAGE, not sure where you got the info from.
There are quite a few intakes on the market that don't have **** maf housings, ams, UR, injen to namea few.
#10
Former Sponsor
iTrader: (1)
Join Date: Jul 2004
Location: Wood Dale, IL
Posts: 1,652
Likes: 0
Received 0 Likes
on
0 Posts
As mentioned above, the bottom plate is just a guard to protect the last set of fins from getting crushed and reducing the effectiveness of the last charge row.
Unless it makes unwanted noise or vibration, I wouldn't worry about it all.
Unless it makes unwanted noise or vibration, I wouldn't worry about it all.
#13
Evolving Member
Thread Starter
Join Date: Dec 2009
Location: Houston, TX
Posts: 242
Likes: 0
Received 0 Likes
on
0 Posts
Thank you, but to make this guy happy I ordered a UR intake, it'll be in tomorrow.