RalliArt blown up! why? help me!
#17
Yep I'd have to agree with Brian on this one. With the Fuel pressure regulator hose off the fuel presure won't increase as the boost increases. You'll end up with a massive lean condition....Mininium holed/melted piston. However you're video has a real metalic sound at one point so I suspect there's something else broken too.
Sorry to be the bearer of bad news...
#19
Evolving Member
Thread Starter
Agreed my new engine im clamping every mother tucked down lol zip ties are now my best friend haha oh well lesson learned problem will be figured out soon and fixed soon after even if I have to replace the engine I love my car to much to just let it go
#20
Evolved Member
iTrader: (7)
Join Date: Sep 2010
Location: 805-Conejo Valley
Posts: 2,558
Likes: 0
Received 0 Likes
on
0 Posts
Ya with tha amount of work you've put into her, I wouldn't let her go either
I think I've seen some blocks listed for $2-3K depending on mileage, if that helps; good luck!
I think I've seen some blocks listed for $2-3K depending on mileage, if that helps; good luck!
#23
Evolved Member
Can you give me some details on the hose clamps you're referring to here please?(type, brand, picture, where can I get them, etc.) I'm just using a ziptie right now, but I still feel like I can't get it as tight as would like on the hose, and so I was wondering if there was something else that would be more secure and reliable.
#24
Evolved Member
Can you give me some details on the hose clamps you're referring to here please?(type, brand, picture, where can I get them, etc.) I'm just using a ziptie right now, but I still feel like I can't get it as tight as would like on the hose, and so I was wondering if there was something else that would be more secure and reliable.
Rich
#26
EvoM Guru
iTrader: (8)
Can you give me some details on the hose clamps you're referring to here please?(type, brand, picture, where can I get them, etc.) I'm just using a ziptie right now, but I still feel like I can't get it as tight as would like on the hose, and so I was wondering if there was something else that would be more secure and reliable.
For added security you can also use hair spray.
No CELL would be trigger for lean mixture at WOT.
#27
Evolving Member
Thread Starter
Well tomorrow is the day. I have to go and see the damage done and decide on what to replace and what to replace it with. I can say for sure im not going back to stock at least replacing pistons rods valves camshafts and getting a resleeve