Grilla

iTrader: (1)

Kompas @ acd-pump.com looks promising. Look at this blingin' rebuild!

crazysnox729

Yea my awd light came on in the process of rebuilding it pump motors are built pretty cheap the brush holder is made from cheap plastic so its costing me a bit of money but better then 2000$ at the dealer

2009 ralliart

Thats all I need. Cost over $800 to repair and I get less than 8 months with it. Did you replace yours with a new one?

beetle_orange

iTrader: (58)

I was told by a friend mechanic at the Mitsubishi dealership that the price of the eom pump is down to 1200 now.

crazysnox729

well I just rebuilt my acd pump and bled it with a switch you can make for next to nothing my acd pump motor brush holder broke apart from the cold winter we had this year and I plan on doing a write up and pictures with in the next couple of weeks because of my work schedule but I found some stuff out when rebuilding the pump and I will share the info on my write up with it


so in total cost to me after I found a pump on ebay and the motor was working and solenoid was good after testing them both and bought 2 seals at 45 cents each and bolts are about 2$ a piece and I don't know the price or size for the motor seal on top but if you have access to a machine shop I am sure you could have the plate made and do the cleaning up your self its not that bad but I have 150$ total in the rebuild I did and that's not to bad but the bleeding you will need two people for that's for sure and a complete bleed will be a 1.5 quarts or so
also I hope the wire up will get sticky so it will held every one out and this will be ralliart only not the evo x

Veronica

iTrader: (2)

^please do. This is a job I think I could tackle myself.

crazysnox729

yea just give me some time with the write up with work and every thing and having to take pictures for it and editing the pictures and make it as easy as possible for every one

Veronica

iTrader: (2)

Perhaps consider making a kit for us and becoming a vendor.

TRK_RDY

I used the same guy, just got word its done, check it out!

neogeo64

iTrader: (3)

Looks better then new!