FSM-20 *Teaser*
#16
Account Disabled
Join Date: Sep 2010
Location: Up North
Posts: 389
Likes: 0
Received 0 Likes
on
0 Posts
dont hate because i am! i have done measurements verses a stock RA side by side!
form roof top to roof top... i am about 6" lower... with about 2.75" to 4.25" clearances on the bottom depending on what you are looking at...
ground to pinch weld is 4.25"
ground to lowest point on the chassis is 3.5"
ground to lowest point of the exhaust is 2.75"
a stock RA is 58.75'' to 59'' depending or what angle and ground... i just call my dealer ship to measures and confirm
my RA is 53'' about 53.5'' depending on angle
58.75" - 53" = 5.75" thats about 6"
form roof top to roof top... i am about 6" lower... with about 2.75" to 4.25" clearances on the bottom depending on what you are looking at...
ground to pinch weld is 4.25"
ground to lowest point on the chassis is 3.5"
ground to lowest point of the exhaust is 2.75"
a stock RA is 58.75'' to 59'' depending or what angle and ground... i just call my dealer ship to measures and confirm
my RA is 53'' about 53.5'' depending on angle
58.75" - 53" = 5.75" thats about 6"
sadly, im lower, and im not 6" dropped.
get a grip.
Thread
Thread Starter
Forum
Replies
Last Post
beyonddc
Evo X General
72
May 13, 2015 06:07 PM