Knower

iTrader: (1)

Yeah, what if a rod spins?

AutoMotoSports

iTrader: (42)

if those were to go bad it would not be a result of the parts rather a result of faulty assembly or improper tune.

There is no warranty on a stroker kit....we are not doing the work.

Eric

AutoMotoSports

iTrader: (42)

We warranty all of our manifolds against cracking or imperfections.

Eric

umiami80

iTrader: (1)

Brain fart newbie and I bet if you detonated hard wnough you could otherwise.....

umiami80

iTrader: (1)

How do you prove that? I mean if it goes, how do you knwo what happens? Lets say compression goes because of the seals, then whose to say what was improper Vs. abuse?

AutoMotoSports

iTrader: (42)

There is no way we can warranty a motor that was assembled by someone else. It would be like buying food at the grocery store then cooking it at your house and burning then asking the grocery store if they will take it back.....I dont think there is one person in this industry that will warranty a motor assembled by someone else. In the 3 years we have been putting together Motors we have never lost a motor due to a bad/ faulty piston, Rod, Crank , bearings or rings. IT has always come down to some kind of human error, Be it low oil, bad tune etc. Even motors assembled in here carry a very specific warranty. A built motor isnt bullet proof. If you ride it hard without the proper tune or preventive maitinence it will not last long at all.

Eric

umiami80

iTrader: (1)

I understand that, I meant by you, like your stroker kit or just a built 2.0

AutoMotoSports

iTrader: (42)

thats a different story. A stoker kit is just that...a kit. Crank rods main studs, bearing pistons etc.

A stroker bottom end is warrantied by us to en extent. if something was installed incorrectly we will of course take care of you but if the motor does fail we have to examine it before we can take blame. I can tell you 99% of the time it comes down to user error. But we stand by all our products and work. if something is done incorrectly we will take care of it no questions asked

AutoMotoSports

iTrader: (42)

1. Tom J - FLA EVO GT35R
2. Markus K - Ludikraut GT3071R
3. John B - Johnnysixer GT3071R
4. Sherif el H. - Hashash- GT35R This one is going to Cairo Egypt boys
5. John C - evom Name unknown - GT35R Kit
6. Tom - Smogrunner- GT35R
7. Fadi - EvoM name unknown - GT3071R Beruit
8. Jeremy C - EVO8ACT- GT3071R
9. Tim Z - NASIOP - GT35R Kit
10. Gregory B - Evo M name unknown - GT3076R Kit
11. AJ R. - Evo M name Unknown - GT3076R Kit
12. Robert B. - Evo M name Unknown - GT3076R Kit

raptor77

how much would a 2.3 stroker bottom cost fully assembled without you guys providing the core??

AutoMotoSports

iTrader: (42)

It would be $4354 If you would like a new oil pump please add $200 to that.

if you can get a core you can knock $1620.00 off that price

Eric

Ams2gJim

1. Tom J - FLA EVO GT35R
2. Markus K - Ludikraut GT3071R
3. John B - Johnnysixer GT3071R
4. Sherif el H. - Hashash- GT35R This one is going to Cairo Egypt boys
5. John C - evom Name unknown - GT35R Kit
6. Tom - Smogrunner- GT35R
7. Fadi - EvoM name unknown - GT3071R Beruit
8. Jeremy C - EVO8ACT- GT3071R
9. Tim Z - NASIOP - GT35R Kit
10. Gregory B - Evo M name unknown - GT3076R Kit
11. AJ R. - Evo M name Unknown - GT3076R Kit
12. Robert B. - Evo M name Unknown - GT3076R Kit
13. Taichiro W. - AKGVR4RICEEATER - GT3076R Kit


Today (6-3-05) is the last day of the group buy. If you wanted to order a kit today is the the day because starting tomorrow the group buy prices are gone.

Jim

gnulooks

iTrader: (1)

Add me in for the 3071R kit. I just spoke to Eric and placed my order. Can u say last on the list...

AutoMotoSports

iTrader: (42)

1. Tom J - FLA EVO GT35R
2. Markus K - Ludikraut GT3071R
3. John B - Johnnysixer GT3071R
4. Sherif el H. - Hashash- GT35R This one is going to Cairo Egypt boys
5. John C - evom Name unknown - GT35R Kit
6. Tom - Smogrunner- GT35R
7. Fadi - EvoM name unknown - GT3071R Beruit
8. Jeremy C - EVO8ACT- GT3071R
9. Tim Z - NASIOP - GT35R Kit
10. Gregory B - Evo M name unknown - GT3076R Kit
11. AJ R. - Evo M name Unknown - GT3076R Kit
12. Robert B. - Evo M name Unknown - GT3076R Kit
13. Taichiro W. - AKGVR4RICEEATER - GT3076R Kit
14. Angel G. - gnulooks - GT3071R Kit

one hour left, looks like that will be the last on the list. Thanks again guys for making this a big success. Me might just have to do this again sometime not too far away.

Eric

Smogrunner

iTrader: (5)

Man oh man! My new AMS 2.3 and 35r kit and my Vishnu autotune Xede software. Yea!!