I was on the dyno earlier in the week:

350 hp, 348 ft-lbs @ 27-28 psi

 

Come on guys, keep posting up those results!

 

Was that pump gas or race gas?

 

My o5 evo put down 264.27HP and 275.06 torque. I have a test pipe and a cold air intake which made it run rich.

 

I know someone had to take pictures and/or video..so let's see it

 

Race gas, 26psi tapering

 

I took some video of the shop car running. I was to busy w/other stuff when other cars was on =( to take other vids and picts sorry guys. I will get the shop car up monday.

 

Thanks to all the AMS crew for putting together a good event.

 

^ ditto.good job as always guys

 

Did any stock 03/04 EVOs dyno at all? Just wondering so I know how effective my mods were.

 

Agreed! After coming back from the event I realized I need more money to mod!!!!

 

i have 05 evo completly stock,no mods at all and i've put 265.49hp and 276.15torque

 

If im not mistaken you have the 05 white evo. I have an 05 also. I had the 05 blue evo with a cold air intake with a test pipe. I was running too rich and I also got the same numbers as you. I had 275.06 torque and 264.27 HP. Im wondering if I had the stock intake would I have gotten a better time????

 

You probably would have seen an improvement. Our cars do not care too much for an intake with no tuning. Kills some performance. Get some tuning around the intake or ditch it.

Chris

 

'04 with AMS TBE no cat, Forge BOC, Forge MBC @ 18-19psi constant. I made 271HP and 268 TQ. No tune or anything like that and running 10.5:1 roughly flor the whole run.