988 whp?
#80
Evolved Member
iTrader: (13)
Join Date: Sep 2004
Location: Olathe, KS
Posts: 2,631
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by AutoMotoSports
hahha I dont know where you guys are getting this information from but the shop is NOT FOR SALE.
in my dealings on the umteen forum boards I post on I will give you some good advice.
dont believe 99% of what you read on the internet. At the very least look at the source of the statement.... and ask this "do they really know what they are talking about"
Eric
in my dealings on the umteen forum boards I post on I will give you some good advice.
dont believe 99% of what you read on the internet. At the very least look at the source of the statement.... and ask this "do they really know what they are talking about"
Eric
#83
Originally Posted by scorke
To be honest I wouldn't be surprised if a 2.1l is whats in there now, with that turbo they need all the R's they can get.
Scorke
Scorke
Very nice job gang. I can't wait to see the numbers on the hose
#84
Originally Posted by dsmfan95
Err, your conversion is a little off.
#85
Originally Posted by AMS
We are maxing out the turbo at this point. Could we make 1000whp? maybe, if it was cold outside, humidity was low, the IC was cooled down, ect. But I wrung it out to the point where the turbo is operating way out of it's efficiency range. If you're curious go look at a GT42R compressor map (74mm wheel) and see where 4.2-4.3PR & 100-105lb/min fall into, it's waaaay out there out of range of the printed efficiency islands.
-Martin
-Martin
#86
Originally Posted by slowTsi
Brent Rau runs high 6s in his rwd eclipse at just under 200. The last time I checked he was making close to 1100whp with no nitrous, as it is not allowed in his class.