Has anyone out there stayed stock displacement with a gt37r turbo? If so what kind of power has it put down, and how does it perform at the track, Thanks

 

This is the kind of info i'm looking for, spool time and numbers.

 

x3

 

x4 whereyou from silveremperor

 

By Princeton how bout you, scott yo?.......guess no ones stayed 2.0l with this turbo haha

 

im from jackson

 

Ive got a 2G Talon with a 37r and a 2.0.... I havent had it tuned on the dyno yet but it definately moves... The lag really isnt all that bad.. It is ALWAYS fully spooled by 4700-4800ish but its hard to watch the tach at that point. Ill post up some numbers when I get it dynoed but on pump gas at around 20 lbs it feels to be about 450-460ish hp.

 

Nice thanks for the input, guess no evo drivers want to try this set up...

 

I'm interested too, but don't we all know the answer already? It's not rocket science your looking at 5K for full boost or a couple hundred rpm laggier than a 35R which most people say is laggy few say it isn't.

The power potential is dependent upon your internals. If you can't use a 35R to it's potential you definately won't be able to use a 37R to it's potential, right?

 

silveremperor,

I know a local friend from Tucson that has a gt37R with a 2.0 stock block and forged pistons. He already put down 481whp untuned on a Mustang dyno.

You can find him on this forum(pjsevo8). I hope that helps.

Carlos

 

those are some strong #'s, yea we all know it spools a couple hundred rpm later than a 35r but still I was more concerned at the track falling out of boost on the 1 to 2 or even the 2 to 3 shifts. Yea fully built motor with that set up should hit around 700 whp on c16...everyone just seems to be changing to the stroker motors, i love the 2.0l 9,000rpm redline

 

+12

 

I will post a review after I get mine tuned..
i'm on a built 2.0 with the GT37R

 

I have a customer that street races out here that would like to remain annonymous but with 1000CC injectrors on a built 2.0 and our AMS 37R kit it put down 658 whp. Spool was much quicker then we had anticipated. I will try and get his dyno sheet with his name removed to show you guys.

Eric

 

I thought Buschur's black drag car used to be a built 2.0 w/ 37R. It would be simple to just search and look back at previous BR posts and find dyno's and track times.