AMS VSR Stock Turbo Results
#1
AMS VSR Stock Turbo Results
You guys asked for it so here it is. This is a stock turbo EVO VIII with Mods at the time of the test being:
AMS FMIC, UIP, alky kit, HKS 272s, 3"tbe, MR BOV, boost at 26psi, K&N cone filter, compeletely tuned at AMS
EDIT:
Now that the little dyno graph confusion is out of the way here are the CORRECT numbers done in the same gear.
You will not notice almost NO loss in spool!!! Pay attention to the HP and torque carried after 4k
Eric
AMS FMIC, UIP, alky kit, HKS 272s, 3"tbe, MR BOV, boost at 26psi, K&N cone filter, compeletely tuned at AMS
EDIT:
Now that the little dyno graph confusion is out of the way here are the CORRECT numbers done in the same gear.
You will not notice almost NO loss in spool!!! Pay attention to the HP and torque carried after 4k
Eric
Last edited by AutoMotoSports; Mar 1, 2007 at 04:22 PM.
#5
I would love to see a graph on a stock turbo IX. That would make me jump on one. Ideal mods would be fuel pump, full 3" turbo-back exhaust, manual boost controller, and a flash/tuning. Then flip out the manifold for the VSR. I would like to see the difference.
Trending Topics
#12
#13
Evolved Member
iTrader: (24)
Join Date: Aug 2005
Location: houston
Posts: 2,154
Likes: 0
Received 0 Likes
on
0 Posts
it does appear to spool slower. Is that from weather conditions or the manifold? It looks like it was relatively hot (85F) during the second dyno run, but I can't make out the temperature reading on the first pull. If it was considerably cooler, that would explain why the stocker outspooled the VSR.