NEW Product Release: AMS Lightweight Front cross member
#1
Former Sponsor
Thread Starter
Join Date: Apr 2007
Location: Chicago
Posts: 300
Likes: 0
Received 0 Likes
on
0 Posts
NEW Product Release: AMS Lightweight Front cross member
Whether you are a drag racer, road racer or street tuner. Getting weight out of the front of the Evo is a MUST! This piece was originally designed for our race cars but can be used on any car, race or street alike. The AMS lightweight front cross member eliminates an astonishing 7lbs of weight from the front of the vehicle and allows for a solid front motor mount to maximize throttle and shift response.
This lightweight item even has provisions for The factory Tie bar and comes in a black powder coated finish.
Available soon from AMS!
Thank you
Rich K.
Marketing Director
AutoMotoSports Inc. (AMS)
Tel:847-709-0530
Fax:847-290-1451
www.amsperformance.com
Rich@amsperformance.com
This lightweight item even has provisions for The factory Tie bar and comes in a black powder coated finish.
Available soon from AMS!
Thank you
Rich K.
Marketing Director
AutoMotoSports Inc. (AMS)
Tel:847-709-0530
Fax:847-290-1451
www.amsperformance.com
Rich@amsperformance.com
#7
Evolved Member
iTrader: (12)
Join Date: Jun 2005
Location: Sleepy Hollow
Posts: 821
Likes: 0
Received 0 Likes
on
0 Posts
Two questions:
Can the front of the car be jacked up from this like the original (if so, a small "jack pad" on the bottom would be good...)?
Can a version be made that takes a high durometer mount instead of a solid mount for those of use that aren't quite hardcore enough for a solid mount?
Thanks...I'll crawl back in my hole now!
Can the front of the car be jacked up from this like the original (if so, a small "jack pad" on the bottom would be good...)?
Can a version be made that takes a high durometer mount instead of a solid mount for those of use that aren't quite hardcore enough for a solid mount?
Thanks...I'll crawl back in my hole now!
Trending Topics
#13
Former Sponsor
iTrader: (42)
This right now will only incorporate the solid mount.
There are no provissions for The undertray but it can still be mounted without the fasteners with no sag, the production model might have those fittings
This will work with the factory Tie bars!
This will be available very soon and it should be around $250.00
I will look into the possible jack point. Obviously weight savings is the number one priority with this piece.
Thie piece will save 6.6 pounds over the factory piece.
Eric
There are no provissions for The undertray but it can still be mounted without the fasteners with no sag, the production model might have those fittings
This will work with the factory Tie bars!
This will be available very soon and it should be around $250.00
I will look into the possible jack point. Obviously weight savings is the number one priority with this piece.
Thie piece will save 6.6 pounds over the factory piece.
Eric