Inside the AMS Engineering Department...
#1
Former Sponsor
Thread Starter
Join Date: Apr 2007
Location: Chicago
Posts: 300
Likes: 0
Received 0 Likes
on
0 Posts
Inside the AMS Engineering Department...
Our customers are aware that we manufacture quality products, but few seem to know that each product is skillfully crafted by our talented engineering staff.
By using Solid Works’ 2008 Computer Aided Design (CAD), the AMS engineering staff manufactures quality parts that offer superior performance. The staff also employs Finite Element Analysis (FEA), a stress-tester, to make sure that each part is optimized for performance and durability before it is even made.
Finally, we put our parts through rigorous road-testing and track-testing with the AMS Road Racing and Drag Racing programs before production. If a part can withstand the abuse from our race cars, it will definitely last on the street.
AMS Product Engineer Drew Johnson
AMS Product Engineer Corey Pew
Prototype AMS Small brake kit
FMIC Prototype
Simulated flow testing
Rapid prototype FMIC End tank
Fitment testing
Thank you
By using Solid Works’ 2008 Computer Aided Design (CAD), the AMS engineering staff manufactures quality parts that offer superior performance. The staff also employs Finite Element Analysis (FEA), a stress-tester, to make sure that each part is optimized for performance and durability before it is even made.
Finally, we put our parts through rigorous road-testing and track-testing with the AMS Road Racing and Drag Racing programs before production. If a part can withstand the abuse from our race cars, it will definitely last on the street.
AMS Product Engineer Drew Johnson
AMS Product Engineer Corey Pew
Prototype AMS Small brake kit
FMIC Prototype
Simulated flow testing
Rapid prototype FMIC End tank
Fitment testing
Thank you
#4
Evolving Member
Join Date: Aug 2005
Location: Mooresville, NC
Posts: 282
Likes: 0
Received 0 Likes
on
0 Posts
looks all too familiar...solid works is hands down better and easier to use than inventor and pro-e
rapid prototyping for the win too!!
reminds me of FSAE
rapid prototyping for the win too!!
reminds me of FSAE
Last edited by homemade wrx; Apr 29, 2008 at 01:18 PM.
#6
Evolving Member
iTrader: (7)
Join Date: Jul 2004
Location: Charlotte, NC
Posts: 266
Likes: 0
Received 0 Likes
on
0 Posts
Nice engineering work! I was wondering if I was going to see some rapid prototyping.
It seems like whenever I read a thread that contains CAD images, a Pro-E vs. Solid Works debate erupts. I don't know why, though, because everyone knows Pro-E is a better CAD tool (it's FEA software leaves much to be desired (read: blows), but for that I use ANSYS).
Devin
It seems like whenever I read a thread that contains CAD images, a Pro-E vs. Solid Works debate erupts. I don't know why, though, because everyone knows Pro-E is a better CAD tool (it's FEA software leaves much to be desired (read: blows), but for that I use ANSYS).
Devin
Trending Topics
#8
Account Disabled
iTrader: (7)
Join Date: Dec 2005
Location: Lansdale
Posts: 2,673
Likes: 0
Received 0 Likes
on
0 Posts
sweet. I still wouldn't spend the extra money on your parts just because you so called "Engineered Them".....oh wait, come to think of it I do have the AMS TBE, AMS FMIC, AMS LICP.......lol may just a couple of parts.
#10
Evolved Member
iTrader: (18)
Cast endtanks finally, you guys are balling on a whole 'nother level now....
This is the reason why I fought with whoever was taking my order about getting my items shipped to a different address, half of us (at least me) like to give you my money in exchange not only for your service and expertise but because we know our money is putting right back into making our cars faster and better through actual engineering.
Keep it up!
Scorke
This is the reason why I fought with whoever was taking my order about getting my items shipped to a different address, half of us (at least me) like to give you my money in exchange not only for your service and expertise but because we know our money is putting right back into making our cars faster and better through actual engineering.
Keep it up!
Scorke
#11
Evolved Member
iTrader: (18)
How much worse does the flow get moving the outlet of the endtank from the back door angle to the one the rapid prototypes are wearing? Is the 90 degree turn significantly better/worse, or was it a matter of building for compatibility with your other IC piping setups.
I imagine the turn toward the engine of the car would hurt it but its more "flat" exit in terms of location horizontally in the end tank might help it?
Scorke
I imagine the turn toward the engine of the car would hurt it but its more "flat" exit in terms of location horizontally in the end tank might help it?
Scorke
#12
AMS hooked our FSAE car up with a dyno run . Thanks for the hookup!
My new job is Pro-E intensive, I wish I could go back to Solidworks but most of our customers are hardcore Pro-E. I think SW2008 is pretty similar to SW2007 but tweaked a little bit for better "user friendliness". I've dabbled with Floworks before and it looks like you guys are using SW Motion as well for in that one pic.
The worse part is I pass by the new shop a few times a week and see all the pretty evo's outside . LMK if you guys need any sidework done
See you guys at the grand opening!
My new job is Pro-E intensive, I wish I could go back to Solidworks but most of our customers are hardcore Pro-E. I think SW2008 is pretty similar to SW2007 but tweaked a little bit for better "user friendliness". I've dabbled with Floworks before and it looks like you guys are using SW Motion as well for in that one pic.
The worse part is I pass by the new shop a few times a week and see all the pretty evo's outside . LMK if you guys need any sidework done
See you guys at the grand opening!
Last edited by thunderbt3; Apr 30, 2008 at 06:20 AM.
#13
Evolved Member
iTrader: (7)
Join Date: Dec 2001
Location: Chicago
Posts: 1,572
Likes: 0
Received 0 Likes
on
0 Posts
Solidworks is cost effective and has a great marketing campaign, use both in industry and then make a decision.
There is a reason the only battle cry Solidworks has is ease of use. I think its easier to have your 200+ part assembly not crash or lock up the computer than it is to have a few easier-to-manage icons. Solidworks has a work limit; a ceiling if you will. Dassault (the parent company) keeps it that way; partially because Solidworks is hacked together on a borrowed kernel, the other bigger reason is Dassault has Catia positioned above it in capabilities. Pro-E is one product, and add-ons determine its limits.
Nice work AMS, probably one of the few shows actually using 3d CAD and Rapid Prototyping. Very neat stuff.
Last edited by Tristar; Apr 30, 2008 at 06:26 AM.