mike1023

iTrader: (11)

Roger that!!

joseph k

iTrader: (29)

while yes that would be cool, a shot would be much cheaper and just as effective.
good looking swap

teamspink20

iTrader: (8)

i just got a s13 trunk back myself and was planning on doing the same exact swap! i would love to see videos that thing has to be an animal

Chris@AMS

iTrader: (9)

I plan to make some videos eventually once the temperature comes back up and the salt gets off the roads. If you think the wiring looks bad now, you should have seen what I started with!! It does look kind of scary in that picture actually, but I assure you it is very tidy

Actually I bought them pre-fab from another company, and they are definitely not the quality I would see from AMS. The v-bands are on there because I plan on making a set of side pipes for it eventually!

I can't wait to make some gross display of power vids in the summer!

hopper

Ohh gotcha, So you did add the v-bands? I just haven't seen alot of companies actually making v-band anything

Boltz.

iTrader: (42)

Thats not possible, he's running a single exhaust.

joseph k

iTrader: (29)

i failed to mention a buddy of mine just finished up his swap a month or two ago. he had a corvette and wrecked it. took the motor out of it and put it in a '95 240. his biggest problem is getting the car to hook. the motor isn't exactly stock

408 iron block/T56
eagle rotating assembly
243 casting heads stage 3+ and milled
compression 11.85 to 1
255/259 639/639 on 113
fast 90/90

the car traps some damn good numbers(131) on motor. he took the nitrous he had on it, when it was in the vette, off for now. the best 60' he has pulled so far was like a 1.8 and the 1/8th mile is horrible. so, there is definitely room for improvement on the front half.

good luck again

Scottr126

iTrader: (62)

I have the startup vid of the car before he put the exhaust on it. The car overall rocks and will be a blast to drive. I will try to post up the vid tommorow when im at the shop.

Nilesh

iTrader: (3)

Very cool swap! So does the LS1 bolt in with Daft innovations swap kit? Also how much you think the car weighs with the swap?

NRGotenks

make sure you put it to a good use
http://ru.youtube.com/watch?v=vh1iKzRyL3A

Chris@AMS

iTrader: (9)

NO vid yet!!! FAIL


It pretty much bolts right in. You kind of need to 'massage' the trans tunnel a little but thats about it. Its scary how well it fits actually!! My car has some weight out of it, so it won't be a good barometer, but it should be about 2500 when I'm done maybe

1slowevo

iTrader: (96)

, that will be a fun ride

mitsuorder

iTrader: (106)

I'm blaming all of your visits to Texas for this idea But seriously, this could be a legal daily down here haha.

Looks awesome and can't wait for a death ride in this beast!

MR Turco

iTrader: (16)

Very nice chris!

Evil Evolution

iTrader: (49)

Hey Chris, are you planning on making this a sick daily driver or a drift car?