2.3 Stroker for under $2000
#35
Former Sponsor
Thread Starter
iTrader: (3)
Join Date: Mar 2003
Location: Arlington Heights, IL
Posts: 793
Likes: 0
Received 0 Likes
on
0 Posts
the crank is a new OEM mitsubishi 100mm stroke crank. This crank has proven reliable to well over 750whp. The 100mm stroke crank has run over 150mph and made well over 750whp on our mechanics car (Tim's Talon).
#39
Former Sponsor
Thread Starter
iTrader: (3)
Join Date: Mar 2003
Location: Arlington Heights, IL
Posts: 793
Likes: 0
Received 0 Likes
on
0 Posts
I should have all the components here by the time we get back from the DSM shootout. I'll take pics and have more info available then. The rods we use (eagle or Crower) come with ARP hardware and we provide ARP main studs as part of the stroker package.
-Martin
-Martin
#44
EvoM Staff Alumni
iTrader: (66)
Originally Posted by MalibuJack
Guys, you'll be getting a call from me soon.. I need the kit, not the assembled setup.. Just waiting on the 20G stuff to be finally released so I can finish the turbo, then I'll finish the engine block..
However, they offer the 2.3 kit in 8.5:1 compression and have not answered me as to whether I can get 8.8:1 to 9:1 for my street car.
Last edited by Zeus; Dec 7, 2004 at 07:38 AM.
#45
Former Sponsor
Thread Starter
iTrader: (3)
Join Date: Mar 2003
Location: Arlington Heights, IL
Posts: 793
Likes: 0
Received 0 Likes
on
0 Posts
Yes you can get 8.8:1 or 9:1 if you want. You would have to wait about 3-4 weeks as I would have to get a custom set made. I would really suggest not going up in compression. The engine will be more sensitive to detonation and you won't see much gains in torque or spool up. I've already tried this and experimented with it, on pump gas try to stay at 8.5:1 or lower.
-Martin
-Martin