anyone done a custom made CAI or SRI?
#16
Evolved Member
iTrader: (23)
Join Date: Aug 2002
Location: Lynnwood, WA
Posts: 2,204
Likes: 0
Received 0 Likes
on
0 Posts
Why stop at 4" cones?! For a few dollars more you can have a 9-1/2" base with a 4" opening Yes, it is almost too much filter. No your engine can't take in TOO much air.
BTW- that ducting stuff works. I cleaned my filter last week and the side and bottom of the filter were WAY dirtier than the top, leading me to believe the duct was actually feeding air from the front vent to the filter.
Let's see the creations!!
BTW- that ducting stuff works. I cleaned my filter last week and the side and bottom of the filter were WAY dirtier than the top, leading me to believe the duct was actually feeding air from the front vent to the filter.
Let's see the creations!!
#19
Evolved Member
iTrader: (8)
Everything is custom made.
The adapter is not a reall adapter. I used to have a Ford Tempo with that filter. There is not a company in the world that makes part for Tempos'. I got a second MAF for the scrap yard, cut it in half and slapped a filter on it..
When it came time to put it on the Lancer though... That was a no fit. I shaped a piece of wood and drilled the Lancer's maf screw holes, then I attached that piece of wood to my Tempo's adapter. It's gettho as hell, but it serves its' pupose
The wood is wrapped with a whole bunch of ductape to make sure there is no wood particuls that go in the engine.
The adapter is not a reall adapter. I used to have a Ford Tempo with that filter. There is not a company in the world that makes part for Tempos'. I got a second MAF for the scrap yard, cut it in half and slapped a filter on it..
When it came time to put it on the Lancer though... That was a no fit. I shaped a piece of wood and drilled the Lancer's maf screw holes, then I attached that piece of wood to my Tempo's adapter. It's gettho as hell, but it serves its' pupose
The wood is wrapped with a whole bunch of ductape to make sure there is no wood particuls that go in the engine.
#21
Newbie
iTrader: (1)
Join Date: Jul 2003
Location: brampton and suaga
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
here's my pic of my cai just go on my site. i dont know how to post pic' on here sorry
http://www.cardomain.com/id/lancercanada
http://www.cardomain.com/id/lancercanada
#24
Newbie
Thread Starter
Join Date: Feb 2004
Location: richmond
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
ok ill post some pics up..as the pics i have are too big to be uploaded...ill get them done on saturday...i got the parts from a local autoparts store...i just got the adapter..and a KN filter...then installed it
#26
Newbie
Join Date: Apr 2004
Location: Manila, Jakarta, San Francisco, Toronto
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
My custom intake
I have ideas for the OZ short ram intake, good budget yet smart and beneficial. I also "assembled" my intake for mr RA. It also gives you a good feeling when you express yourself when you customize, and or mix-and match things.
Green Archer, PM me!
Green Archer, PM me!
Thread
Thread Starter
Forum
Replies
Last Post
kraig
Lancer Engine Management / Tuning Forums
11
Apr 22, 2009 04:14 PM
bigdoggy_dog
EvoM New Member / FAQs / EvoM Rules
16
Dec 13, 2004 09:31 AM