1/4 Times
#16
Evolved Member
iTrader: (10)
Id like to know about the nitrous as well. Just an intercooler sprayer or actual injection? At 21psi its going to be impossible to get anywhere near 121mph. I trapped 120 with my setup at 26psi and a simple tune and thats even hard to believe. Where did you run at and do you have the slips? Or at least your other numbers?
#17
Evolved Member
iTrader: (1)
at 3300' ive trapped 110.7mph using 91oct and 22psi with no cams.
this was with a g-tech pro,at sea level with race gas the most i saw was 113.4mph boosting to 24psi!
maybe with cams and an 02housing i will peak up 1-2mph more in the 1/4mile
i dont see how you got 121mph????
please tell us more!
this was with a g-tech pro,at sea level with race gas the most i saw was 113.4mph boosting to 24psi!
maybe with cams and an 02housing i will peak up 1-2mph more in the 1/4mile
i dont see how you got 121mph????
please tell us more!
#21
Evolved Member
iTrader: (6)
As for not letting things go. Yes, you're right. I do not sit here and let people post outrageous claims that everyone knows are impossible, especially when the person doesn't even show a timeslip. What you don't realize is your time are not important - I am not trying to deny your time. I am saying there is no way in HELL that you trapped 121mph, and ESPECIALLY not with only 21psi. Hell, the most you'd trap on those mods with 21psi would be 113-114. So, that means you had to be spraying at least a 50 shot, and NO, I don't mean the intercooler sprayer, which does next to nothing.
So, how big was your shot, and in what gear did you activate it?
#22
Evolved Member
iTrader: (37)
Join Date: Sep 2003
Location: Spec-Ops Motorsports, Fayetteville, NC
Posts: 3,146
Likes: 0
Received 2 Likes
on
2 Posts
i've got a buddy here however with a 50 trim who ran an 11.75 at 121... there are many things that can add to it, but with his setup, i dont see him trapping 121... unless he is going down hill
#24
Evolved Member
iTrader: (37)
Join Date: Sep 2003
Location: Spec-Ops Motorsports, Fayetteville, NC
Posts: 3,146
Likes: 0
Received 2 Likes
on
2 Posts
just a slight difference lol i do however believe i will be trapping about 120 with my current setup and after AMS comes down for our tune in 2 weeks. i have trapped as high as 117.8 but only cut a 12.0 that run, terrible 60ft
#27
Evolving Member
Join Date: Mar 2005
Location: Warsaw, Indiana
Posts: 454
Likes: 0
Received 0 Likes
on
0 Posts
Post up our times and mods? Laugh. Just go to the drag forum, man, that's what it's for. I will start off by saying that your trap speed is near impossible with those mods on the stock turbo unless you were actually spraying nitrous. I mean, come on, you have an HFC for cryin out loud.
Nvr2old32, I'm curious why you said his driving was amazing compared to yours when you ran the same ET but with 3 less mph. That means your driving was far superior. Driving didn't get him 121mph traps...that's strictly raw power. I do not believe he ran 121mph traps with those mods, though, sorry.
Nvr2old32, I'm curious why you said his driving was amazing compared to yours when you ran the same ET but with 3 less mph. That means your driving was far superior. Driving didn't get him 121mph traps...that's strictly raw power. I do not believe he ran 121mph traps with those mods, though, sorry.
#28
Evolved Member
iTrader: (37)
Join Date: Sep 2003
Location: Spec-Ops Motorsports, Fayetteville, NC
Posts: 3,146
Likes: 0
Received 2 Likes
on
2 Posts
warr, i wont be running 28 psi, im still on stock internals and no ARP studs.... i trapped at nearly 118 with the mods in my sig minus what i just stated above. I could only imagine with a custom tune, the mods i added and a good pass i should be able to trap 2 or 3 mph higher. I have an EBC im installing tomorrow as well as a forge wastegate actuator on the way. Either way, 28 psi will not be happening
#29
Evolved Member
iTrader: (30)
hey john, how are you ? My 1/4 time is before the dyno, before the ported coated mani, stainless O2 and ported hotside, and before the MIVEC monster you gave me ..... it is also on racegas at 25 psi or so.... my dyno is pump gas on 21 psi. with my mods in my sig. i am installing an ebc tomorrow though so that should help things out some.
How much weight reduction if any? I am glad that the new tune feels like a monster. I got confused and thought this was post tune, but either way impressive. I cant wait for spring and the new season.