Mellon Tuning EVO 10.41 @ 135 93 octane stock mas stock ecu full weight
#1
Account Disabled
Thread Starter
iTrader: (38)
Join Date: Aug 2005
Location: Virginia Beach, Virginia
Posts: 9,319
Likes: 0
Received 1 Like
on
1 Post
Mellon Tuning EVO 10.41 @ 135 93 octane stock mas stock ecu full weight
that's right, I hit the track again last night
video http://www.racevideoforums.com/forum...k-ecu-mas.html alternate link http://videos.streetfire.net/video/M...-93_195851.htm
Video with others from my forum:
RaceVideoForums.com at the drag strip ZR1 Sicgoat Civette Mellon Tuning EVO & more http://www.racevideoforums.com/forum...-evo-more.html
93 octane (no meth water or alk)
stock ecu
stock mas (still has honeycomb and glue holding it in)
BFG Drag Radials
no weight reduction, in fact I had some camera gear and a 30-40lbs of tools in the trunk. Minus the drag radials, this is exactly how I drive the car to work every day.
out of the 11 second club and into the 10's
60' 1.68
1/8 6.78 @ 107.66
1/4 10.41 @ 135.13
I only made 3 attempts and I called it a night, that's good enough for now I still didn't have my logger cable so I couldn't adjust the tune and it's pretty rich at very high rpm so there might be a little more in it with that and a better 60'.
I'll edit video tonight most likely, in car and out car
current mods:
BR HTA 35R .63 @ 34.5psi on 93 octane ~600awhp
PTE 1000cc injectors
BR 2.0L
BR Stage 3 head
BR BF272 cams
BR twin walbro fuel pumps
BR 3" tbe, test pipe, bullet muffler
BR 3" intake pipe + Mas adapter
BR UICP
BR Mini Battery
BR Race FMIC
BR COP
ARP head studs
PPI ported stock intake manifold
PPI 65MM throttle body
Tilton Twin Disc Carbon clutch
My tuning www.mellontuning.com
edit* my brother Turbomiketsi got me some info from the track website last night:
Mellon's was car #4
Race Results Enter 10/30/08 TNT, 4
Temperature 52.40°
Barometric Pressure 30.71
Humidity 82.00%
Standard Rel Air Density 101.94%
Track Rel Air Density 103.90%
Effective Altitude -643.00 ft
Tail Wind 0.00 mph
4
1.940 60'
4.888 330'
7.239 1/8
105.010 MPH
9.247 1000'
10.939 1/4
132.83 MPH
4
60' 2.240
330' 5.359
1/8 7.712
MPH 105.080
1000' 9.718
1/4 11.409
MPH 133.41
4
60' 1.687 (finally did a burnout)
330' 4.498
1/8 6.784
MPH 107.660
1000' 8.752
1/4 10.418
MPH 135.13
track vs g-tech
60' 1.68 1.67
1/8 6.78 6.65
1/8 107.66 111.08
1/4 10.42 10.27
1/4 135.13 135.91
it seems the powershifting throws it off a little but it's still helpful when you can't get to the track.
video http://www.racevideoforums.com/forum...k-ecu-mas.html alternate link http://videos.streetfire.net/video/M...-93_195851.htm
Video with others from my forum:
RaceVideoForums.com at the drag strip ZR1 Sicgoat Civette Mellon Tuning EVO & more http://www.racevideoforums.com/forum...-evo-more.html
93 octane (no meth water or alk)
stock ecu
stock mas (still has honeycomb and glue holding it in)
BFG Drag Radials
no weight reduction, in fact I had some camera gear and a 30-40lbs of tools in the trunk. Minus the drag radials, this is exactly how I drive the car to work every day.
out of the 11 second club and into the 10's
60' 1.68
1/8 6.78 @ 107.66
1/4 10.41 @ 135.13
I only made 3 attempts and I called it a night, that's good enough for now I still didn't have my logger cable so I couldn't adjust the tune and it's pretty rich at very high rpm so there might be a little more in it with that and a better 60'.
I'll edit video tonight most likely, in car and out car
current mods:
BR HTA 35R .63 @ 34.5psi on 93 octane ~600awhp
PTE 1000cc injectors
BR 2.0L
BR Stage 3 head
BR BF272 cams
BR twin walbro fuel pumps
BR 3" tbe, test pipe, bullet muffler
BR 3" intake pipe + Mas adapter
BR UICP
BR Mini Battery
BR Race FMIC
BR COP
ARP head studs
PPI ported stock intake manifold
PPI 65MM throttle body
Tilton Twin Disc Carbon clutch
My tuning www.mellontuning.com
edit* my brother Turbomiketsi got me some info from the track website last night:
Mellon's was car #4
Race Results Enter 10/30/08 TNT, 4
Temperature 52.40°
Barometric Pressure 30.71
Humidity 82.00%
Standard Rel Air Density 101.94%
Track Rel Air Density 103.90%
Effective Altitude -643.00 ft
Tail Wind 0.00 mph
4
1.940 60'
4.888 330'
7.239 1/8
105.010 MPH
9.247 1000'
10.939 1/4
132.83 MPH
4
60' 2.240
330' 5.359
1/8 7.712
MPH 105.080
1000' 9.718
1/4 11.409
MPH 133.41
4
60' 1.687 (finally did a burnout)
330' 4.498
1/8 6.784
MPH 107.660
1000' 8.752
1/4 10.418
MPH 135.13
track vs g-tech
60' 1.68 1.67
1/8 6.78 6.65
1/8 107.66 111.08
1/4 10.42 10.27
1/4 135.13 135.91
it seems the powershifting throws it off a little but it's still helpful when you can't get to the track.
Last edited by Mellon Racing; Nov 27, 2008 at 07:38 AM.
#3
Account Disabled
Thread Starter
iTrader: (38)
Join Date: Aug 2005
Location: Virginia Beach, Virginia
Posts: 9,319
Likes: 0
Received 1 Like
on
1 Post
There's more in it on pump, new HTA86 turbo is on the way...bigger wheels and going from .63 to .82 Eventually I get around to higher boost and c16 and will begin the hunt for 9's
#5
Account Disabled
Thread Starter
iTrader: (38)
Join Date: Aug 2005
Location: Virginia Beach, Virginia
Posts: 9,319
Likes: 0
Received 1 Like
on
1 Post
I never had a doubt about going 10's on the stock ecu/mas but definitely never expected to get anywhere near the 9's so I'm very excited and motivated. I think it can be done, that would blow some minds.
Trending Topics
#13
Account Disabled
Thread Starter
iTrader: (38)
Join Date: Aug 2005
Location: Virginia Beach, Virginia
Posts: 9,319
Likes: 0
Received 1 Like
on
1 Post
Mark my brother even said "dude, are you going to take all that **** out of your trunk before you race???" I said "nope, this is how I drive it every day to work"
#14
Evolved Member
iTrader: (53)
Holy mo(^(*^& fu(%^$) crap!!! That is probably one of the most impressive things I have seen this entire year!!! WOW!!
Great freaking job buddy. I am completely, 110% amazed. You make me want to change back to a stock ECU! haha Holy moly, I am telling you I just can't believe it and I can't tell you how impressed I am!
That is fantastic. Your new turbo shipped out yesterday.
Would you do me a favor and add your name and information for me here?:
http://buschurforums.com/forum/showthread.php?t=21714
WOW!! You are the freaking man.
Great freaking job buddy. I am completely, 110% amazed. You make me want to change back to a stock ECU! haha Holy moly, I am telling you I just can't believe it and I can't tell you how impressed I am!
That is fantastic. Your new turbo shipped out yesterday.
Would you do me a favor and add your name and information for me here?:
http://buschurforums.com/forum/showthread.php?t=21714
WOW!! You are the freaking man.
Last edited by David Buschur; Oct 31, 2008 at 09:21 AM.