Evovin's first on 10's....but not satisfied!
Nov 2, 2009, 05:11 PM
#1
Evolved Member
Thread Starter
iTrader: (64)
Join Date: Jan 2007
Location: Florida
Posts: 3,377
Likes: 0
Received 0 Likes
on
0 Posts
Evovin's first on 10's....but not satisfied!
I ran the Evo yesterday at IFO in Montgomery.
Best et 10.90@129mph (race gas but misfiring)
Best trap 135mph (race gas but misfiring) et was 11.06
Best trap on pump gas was 131mph
Best 60ft 1.58
Mark @ TTR did a quick tune(via emal) @39psi but goes down to 36-37psi due to my leaking TB shaft seal
Timing are also low. Tune was very conservative and AFR was 10.98-11.04 all the way on top.
Shop ran out of VP C16 so I used Sunnoco 116 octane and forgot to mention it to Mark. This was the reason why I was misfiring according to Mark/Keith.
Tire pressure was 11psi Front and 12psi Rear. It was very hard to control launching it. My 2 step was 7400 and making 28-30psi boost. I keep missing gears also don't know if its because my clutch was getting hot from the hard launch.
Ill post vid later. Pics for now!
Thanks to my sponsor:
TurboTrix Racing
SparkTech Ignitions and special thanks to Jim Indy Evo
Thanks to Pcola guys for helping out at the track too.
crew before leaving our town . BTW we drove 190 miles to the track!
(iPhone pics only)
Best et 10.90@129mph (race gas but misfiring)
Best trap 135mph (race gas but misfiring) et was 11.06
Best trap on pump gas was 131mph
Best 60ft 1.58
Mark @ TTR did a quick tune(via emal) @39psi but goes down to 36-37psi due to my leaking TB shaft seal
Timing are also low. Tune was very conservative and AFR was 10.98-11.04 all the way on top.Shop ran out of VP C16 so I used Sunnoco 116 octane and forgot to mention it to Mark. This was the reason why I was misfiring according to Mark/Keith.
Tire pressure was 11psi Front and 12psi Rear. It was very hard to control launching it. My 2 step was 7400 and making 28-30psi boost. I keep missing gears also don't know if its because my clutch was getting hot from the hard launch.
Ill post vid later. Pics for now!
Thanks to my sponsor:
TurboTrix Racing
SparkTech Ignitions and special thanks to Jim Indy Evo
Thanks to Pcola guys for helping out at the track too.
crew before leaving our town . BTW we drove 190 miles to the track!
(iPhone pics only)
Last edited by evovin; Nov 4, 2009 at 03:39 PM.
Nov 2, 2009, 05:18 PM
#3
Evolving Member
Join Date: Jan 2006
Location: akrun, ohio
Posts: 437
Likes: 0
Received 0 Likes
on
0 Posts
Car looks good! Sucks about misfire!
I just picked up a set of those Mazda Rims for my ET streets! Thats what i am going to run on the street with our new project car! They look good polished!!
Good luck getting everything squared away!
I just picked up a set of those Mazda Rims for my ET streets! Thats what i am going to run on the street with our new project car! They look good polished!!
Good luck getting everything squared away!
Nov 2, 2009, 06:21 PM
#5
Evolving Member
iTrader: (5)
Join Date: Sep 2005
Location: Minnesota
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
10's
Congrats on the 10's. Gotta post up some vids.
Love the pic with the crew. Pretty sick lookin' crew with the R8, M3, and two red Evo's. Did they run too? If so, what times?
Like the clown driver in the red IX.
Love the pic with the crew. Pretty sick lookin' crew with the R8, M3, and two red Evo's. Did they run too? If so, what times?
Like the clown driver in the red IX.
Trending Topics
Nov 2, 2009, 06:34 PM
#10
Evolved Member
Thread Starter
iTrader: (64)
Join Date: Jan 2007
Location: Florida
Posts: 3,377
Likes: 0
Received 0 Likes
on
0 Posts
nope! I did scuff it at first but just found out that they have a diff off set. Make sure that the ones say #50 in the rims goes to your front and the ones without #50 goes to the rear.
