ProccoEvo test run of today
Sep 19, 2010, 05:23 PM
#1
ProccoEvo test run of today
Hi Guy's after waiting for a few month on parts for our tranny, we finally are able to take the Proccoevo back to the track and do some test runs with it 
1st pass the car was rich as hell and of course with less boost it ran a decent 8.87 @ 156mph , the 2nd pass we leaned it out and went up on boost it went 9.66 @ 106mph, the clutch started to spin on 3rd and 4th gear, for the 3rd pass we did some adjustments to the clutch but it acted up again on top gear, we ran again 8.87 @ 159mph so we decided to pack it up for the day 
we will come back again we have been using this Exedy clutch for over a year and it has been very good with no problems... but we all know that a good thing can not last forever 
so it was just a matter of time 
we are going to install the replacement kit from Exedy
Here are a few ****ty cell vids and time slips from today
click on picture for vid
http://www.youtube.com/watch?v=N1r73...layer_embedded
1st pass the car was rich as hell and of course with less boost it ran a decent 8.87 @ 156mph , the 2nd pass we leaned it out and went up on boost it went 9.66 @ 106mph, the clutch started to spin on 3rd and 4th gear, for the 3rd pass we did some adjustments to the clutch but it acted up again on top gear, we ran again 8.87 @ 159mph so we decided to pack it up for the day we will come back again we have been using this Exedy clutch for over a year and it has been very good with no problems... but we all know that a good thing can not last forever so it was just a matter of time we are going to install the replacement kit from Exedy Here are a few ****ty cell vids
and time slips from todayclick on picture for vid
http://www.youtube.com/watch?v=N1r73...layer_embedded
Last edited by ProccoEVO; Sep 27, 2010 at 06:34 PM.
Trending Topics
Sep 20, 2010, 02:50 PM
#13
Triple carbon and is a hell of a unit
! To clear things up we pull the clutch but actually the problem appear to be the push hydraulic Bearing was not releasing all the way
So far Exedy clutch is been great
! To clear things up we pull the clutch but actually the problem appear to be the push hydraulic Bearing was not releasing all the way So far Exedy clutch is been great
Last edited by ProccoEVO; Sep 20, 2010 at 02:52 PM.
Sep 20, 2010, 03:07 PM
#14
if I ever let go of my Proccomovil they better have lot's of $$$$$$$$$$$$$$$$$$$$$$$$$ it is not only the money but more of the hard work and dedication that i have put into this Evoeverything has a price but not this one at this time
so not is not for sale at the moment Hey wait to you see the Proccoevo2
you'll like it!
