What size/ brand of injectors do you use for E85?
May 14, 2009, 12:21 AM
#5
Custom modified Lucas based 1200cc here
Quote about disc based injectors from internet.
Top feed disc injectors use a small disc with six holes around its circumference. The disc rests on a short chimney that surrounds a metering hole. As the disc is raised off the chimney by magnetic force, fuel flows through the holes in the disc, over the walls of the chimney, and out the metering hole to form a full, finely atomized cone.
Performance advantages over pintle injectors (i.e. Ford / Bosch & Accel types) as listed by Delphi:
• The flat mating surface ensures that no excess fuel is present to evaporate and therefore, no deposits or clogging can occur.
• Compatible with alternative fuels (i.e. E85, Methanol)
• Longer service life
• High-speed disc action allows wider dynamic flow range for improved idling
• Quieter operation
• Revolutionary disc design resists build up deposits which can affect fuel flow.
• No Fuel leakage for quicker starts
no mal intent against RC here but.....
Lucas on left RC on right
PS mine have stainless steel bodies but are Lucas 120 lb.
Quote about disc based injectors from internet.
Top feed disc injectors use a small disc with six holes around its circumference. The disc rests on a short chimney that surrounds a metering hole. As the disc is raised off the chimney by magnetic force, fuel flows through the holes in the disc, over the walls of the chimney, and out the metering hole to form a full, finely atomized cone.
Performance advantages over pintle injectors (i.e. Ford / Bosch & Accel types) as listed by Delphi:
• The flat mating surface ensures that no excess fuel is present to evaporate and therefore, no deposits or clogging can occur.
• Compatible with alternative fuels (i.e. E85, Methanol)
• Longer service life
• High-speed disc action allows wider dynamic flow range for improved idling
• Quieter operation
• Revolutionary disc design resists build up deposits which can affect fuel flow.
• No Fuel leakage for quicker starts
no mal intent against RC here but.....
Lucas on left RC on right
PS mine have stainless steel bodies but are Lucas 120 lb.
Last edited by oldevodude; May 14, 2009 at 12:38 AM.
Trending Topics
May 14, 2009, 09:01 AM
#9
Evolved Member
iTrader: (1)
Join Date: Jul 2004
Location: Los Angeles
Posts: 851
Likes: 0
Received 0 Likes
on
0 Posts
I currently have a set of overworked PTE 880s on the Evo, but I have my eye on a set of ID 1000s for both it and my wife's WRX.
I ran Denso 660cc on E85 for 6 months. Now that's being overworked..
