Does this look bad?
#1
Does this look bad?
Hi
I've just done a 3rd gear WOT log and it seems lick my stock E8 MR is knocking quite a lot. Is this as bad as it seems to me - I'm a total newbie and would have thought the stock ROM would be very safe/good but to me it looks bad.
I've just done a 3rd gear WOT log and it seems lick my stock E8 MR is knocking quite a lot. Is this as bad as it seems to me - I'm a total newbie and would have thought the stock ROM would be very safe/good but to me it looks bad.
Code:
RPM TPS KNOCK COUNT --------------------------- 2750 26.27 0 2718 26.27 0 2718 26.27 0 2750 26.27 0 2750 29.41 0 2781 36.86 0 2843 85.49 1 2843 100 1 2906 100 1 2968 100 1 3062 100 4 3156 100 4 3250 100 4 3343 100 4 3437 100 5 3531 100 5 3656 100 6 3781 100 6 3906 100 6 4062 100 6 4218 100 8 4375 100 8 4500 100 8 4625 100 8 4781 100 9 4906 100 9 5062 100 9 5250 100 9 5375 100 9 5531 100 8 5656 100 8 5781 100 8 5843 100 8 6000 100 8 6125 100 7 6250 100 7 6343 100 7 6437 100 7 6531 100 7 6656 100 6 6750 100 6 6812 100 6 6937 100 6 7031 100 6 7125 100 5 7250 100 5 7343 100 5 7406 100 5 7500 100 4 7562 100 4 7718 100 7 7406 100 21 7656 18.04 10 7437 15.69 0 7000 14.12 0
#2
yes it's not good. but are these stock ecu's or are they modified after they leave mitsubishi? can you log timing and let us see that also? what are you using to log with ecu flash I assume?
Last edited by cfdfireman1; Dec 2, 2006 at 06:58 AM.
#4
Originally Posted by boony
Hi
I've just done a 3rd gear WOT log and it seems lick my stock E8 MR is knocking quite a lot. Is this as bad as it seems to me - I'm a total newbie and would have thought the stock ROM would be very safe/good but to me it looks bad.
I've just done a 3rd gear WOT log and it seems lick my stock E8 MR is knocking quite a lot. Is this as bad as it seems to me - I'm a total newbie and would have thought the stock ROM would be very safe/good but to me it looks bad.
Code:
RPM TPS KNOCK COUNT --------------------------- 2750 26.27 0 2718 26.27 0 2718 26.27 0 2750 26.27 0 2750 29.41 0 2781 36.86 0 2843 85.49 1 2843 100 1 2906 100 1 2968 100 1 3062 100 4 3156 100 4 3250 100 4 3343 100 4 3437 100 5 3531 100 5 3656 100 6 3781 100 6 3906 100 6 4062 100 6 4218 100 8 4375 100 8 4500 100 8 4625 100 8 4781 100 9 4906 100 9 5062 100 9 5250 100 9 5375 100 9 5531 100 8 5656 100 8 5781 100 8 5843 100 8 6000 100 8 6125 100 7 6250 100 7 6343 100 7 6437 100 7 6531 100 7 6656 100 6 6750 100 6 6812 100 6 6937 100 6 7031 100 6 7125 100 5 7250 100 5 7343 100 5 7406 100 5 7500 100 4 7562 100 4 7718 100 7 7406 100 21 7656 18.04 10 7437 15.69 0 7000 14.12 0
And you also go to almost 7500?
#5
Originally Posted by 05 EVO RS
i think its ok its probally normal engine noises, one of the guys at apex-i said on the safc-II anything over 60 you should worry about and your way below that.
#6
Max is 36. The 21 and 10 at the end are the rev limiter. The knock sum is not comparable with Apexi products.
Boony, we also need to see ignition timing and octane number at least.
The knock sums aren't terribly alarming if the octane number is half decent. The ECU is doing its job and you can improve all this when you get your wideband, fuel pump and exhaust and being tuning.
Boony, we also need to see ignition timing and octane number at least.
The knock sums aren't terribly alarming if the octane number is half decent. The ECU is doing its job and you can improve all this when you get your wideband, fuel pump and exhaust and being tuning.
Trending Topics
#8
I've looked at your log. The ECU appears to be doing its job. Your knock sums are a little on the high side but I don't believe that your engine is being harmed. The octane number goes down a little, this isn't dramatically different from some other logs of JDM ECU cars running on UK fuel like yours is. The JDM ROMs run considerably more timing than the US ROMs.
I prefer to keep the knock sum below 4. When you tune your car you'll be improving things.
I prefer to keep the knock sum below 4. When you tune your car you'll be improving things.
#10
fwiw, my stock '05 GSR had a fair amount of knock. Up to 10 counts at 7k. It wasn't as consistent as yours. Some knock around spoolup, then it usually degraded and came back in after 5500.
And that's on Sunoco 94.
I decided I didn't like that and got an eflash to clean things up. Much better now.
And that's on Sunoco 94.
I decided I didn't like that and got an eflash to clean things up. Much better now.
#12
I think that you have too much knock; this is my log from yesterday in 2nd and 3th gear
2nd 3th
rpm tps knock rpm tps knock
4312 100 0 5375 100 0
4625 100 0 5593 100 0
4937 100 0 5687 100 0
5312 100 0 5875 100 0
5718 100 0 6062 100 0
6156 100 0 6218 100 0
6468 100 0 6437 100 0
6875 100 0 6562 100 0
7156 100 0 6718 100 0
7437 100 0 6906 100 0
7062 100 0
7187 100 0
7343 100 0
2nd 3th
rpm tps knock rpm tps knock
4312 100 0 5375 100 0
4625 100 0 5593 100 0
4937 100 0 5687 100 0
5312 100 0 5875 100 0
5718 100 0 6062 100 0
6156 100 0 6218 100 0
6468 100 0 6437 100 0
6875 100 0 6562 100 0
7156 100 0 6718 100 0
7437 100 0 6906 100 0
7062 100 0
7187 100 0
7343 100 0
#13
but in 4th gear
rpm tps knock
5406 100 5
5750 100 5
5687 100 5
5781 100 5
5937 100 5
6000 100 4
6062 100 4
6187 100 4
6281 100 4
6312 100 4
6406 100 4
6531 100 3
always try to tunned your air fuel ratio and knock in 4th gear....you will tunned it better
rpm tps knock
5406 100 5
5750 100 5
5687 100 5
5781 100 5
5937 100 5
6000 100 4
6062 100 4
6187 100 4
6281 100 4
6312 100 4
6406 100 4
6531 100 3
always try to tunned your air fuel ratio and knock in 4th gear....you will tunned it better
#14
I ran your log in DLL and this is what it shows. Since your car is stock, the only thing I can think of is bad gas. Here in CA, gas blends are switched this time of year. And in some cases it makes cars knock more than before. Perhaps you have the same thing happening in the UK.
#15
Originally Posted by EVO2003VIII
but in 4th gear
rpm tps knock
5406 100 5
5750 100 5
5687 100 5
5781 100 5
5937 100 5
6000 100 4
6062 100 4
6187 100 4
6281 100 4
6312 100 4
6406 100 4
6531 100 3
always try to tunned your air fuel ratio and knock in 4th gear....you will tunned it better
rpm tps knock
5406 100 5
5750 100 5
5687 100 5
5781 100 5
5937 100 5
6000 100 4
6062 100 4
6187 100 4
6281 100 4
6312 100 4
6406 100 4
6531 100 3
always try to tunned your air fuel ratio and knock in 4th gear....you will tunned it better
Those of us who have not figured how to make the AFR the same regardless of gear, tune in 3rd gear. My car is currently tuned to run @ an average of 11.5:1 in 3rd gear. If I tune it to run the same AFR in 4th gear, then my 3rd gear AFR would be @ around 11.8-12:1 which is way too lean for 93 octane gas that I use.