ECUFlash / Evoscan / Mitsulogger Questions
#151
Evolving Member
iTrader: (14)
Joined: May 2006
Posts: 296
Likes: 0
Received 0 Likes
on
0 Posts
From: 559
but how do i get the power/tq graph to work for evoscan 0.98v?...i plug in the numbers
like
3245 lbs (vehicle weight)
214lbs (person/other weight)
24.4in(tire diamer/outer tire not rim)
then i changed
temps to 76 degrees f
and the wind tunnel drag to .95 since i didnt know
--all im getting is an error message..im lost
like
3245 lbs (vehicle weight)
214lbs (person/other weight)
24.4in(tire diamer/outer tire not rim)
then i changed
temps to 76 degrees f
and the wind tunnel drag to .95 since i didnt know
--all im getting is an error message..im lost
#152
Evolved Member
iTrader: (12)
I'm currrently logging boost with Mitsulogger right now. I have to convert the recorded value back to RAW, then to voltage, and then to a boost value in excel. Is there a way to make this happen automatically? I guess different MDP input selections can be added in the next version of Mitsulogger?
#154
Evolved Member
iTrader: (30)
Joined: Jul 2006
Posts: 1,286
Likes: 0
Received 0 Likes
on
0 Posts
From: in my Evo
i just downloaded evoscan and i finally got the framework to work with vista but now when i try to install evoscan it askes me to either repair od remove evoscan .98, am i supposed to remove it or whats the deal??? im using ecuflash and i have mitsulogger and they both seem to work fine...
#155
Evolving Member
iTrader: (12)
Joined: Oct 2006
Posts: 198
Likes: 0
Received 0 Likes
on
0 Posts
From: South Florida
Is there a way for the unchecked values in EvoScan to not come up in the log file? It's a pain to hide those columns in order to review the log. I read the entire post, most of it in detail, and couldn't find an answer.
Thanks.
Thanks.
#159
Thread Starter
EvoM Guru
iTrader: (5)
Just open the data.xml file in evoscan, or the requestid.xml file in mitsulogger and change the order, the first one in line gets the first available column (after the date/timestamp) and so on.
mitsulogger doesn't include headers or commas for unused fields so its really not as much of an issue with it, but some people do like to reorder the fields based on relevence or how they want their data grouped.
Oh and a quick blurb about Mitsulogger 1.6, I have AEM wideband support working, and should have Innovate support by the end of this weekend. Hoping to get a release out on sunday night.
mitsulogger doesn't include headers or commas for unused fields so its really not as much of an issue with it, but some people do like to reorder the fields based on relevence or how they want their data grouped.
Oh and a quick blurb about Mitsulogger 1.6, I have AEM wideband support working, and should have Innovate support by the end of this weekend. Hoping to get a release out on sunday night.
Last edited by MalibuJack; Mar 12, 2007 at 08:14 PM.
#161
Evolved Member
iTrader: (5)
So, can I calc IDC in Evoscan and have it appear on all my logs?
Like this?
<DataListItem DataLog="Y" Display="Injector Duty" LogReference="IDC" RequestID="00" Eval="([InjPulseWidth]*[RPM])/1200" Unit="%" MetricEval="" MetricUnit=""
ResponseBytes="1" GaugeMin="0" GaugeMax="125" ChartMin="0" ChartMax="125" Notes="([InjPulseWidth]*[RPM])/1200"/>
Like this?
<DataListItem DataLog="Y" Display="Injector Duty" LogReference="IDC" RequestID="00" Eval="([InjPulseWidth]*[RPM])/1200" Unit="%" MetricEval="" MetricUnit=""
ResponseBytes="1" GaugeMin="0" GaugeMax="125" ChartMin="0" ChartMax="125" Notes="([InjPulseWidth]*[RPM])/1200"/>
#162
Evolved Member
iTrader: (5)
Ok, this worked in Evo Scan and it creates a log column for IDC and calculates it. Neat.
Next I put the items in the order I wanted to see them, well I ran into trouble there because LoadCalc and IDC need to be after the items that are referenced in their calculations, not a problem.. I moved them.
Ok going well, so now I think it would be cool to see IDC in DataLogLab and that's where I ran into problems. Although I was able to change the evoscan.txt file to include a definition for IDC, DataLogLab will not accept the new data item and I dont know how to get it in so I just removed it from the Evoscan.txt file for now.
I have a new problem.. I've done something to make Dataloglab not plot my wideband?? I put the original DataLogLab evoscan.txt file in and still no go. Does it have something to do with the order? All of the other columns plot fine and other the fact that they have an IDC column and some of the item's order is changed nothing is different in the evoscan logs. Can someone please help me out here. Thanks!
This thread has logs
https://www.evolutionm.net/forums/sh...d.php?t=257452
Next I put the items in the order I wanted to see them, well I ran into trouble there because LoadCalc and IDC need to be after the items that are referenced in their calculations, not a problem.. I moved them.
Ok going well, so now I think it would be cool to see IDC in DataLogLab and that's where I ran into problems. Although I was able to change the evoscan.txt file to include a definition for IDC, DataLogLab will not accept the new data item and I dont know how to get it in so I just removed it from the Evoscan.txt file for now.
I have a new problem.. I've done something to make Dataloglab not plot my wideband?? I put the original DataLogLab evoscan.txt file in and still no go. Does it have something to do with the order? All of the other columns plot fine and other the fact that they have an IDC column and some of the item's order is changed nothing is different in the evoscan logs. Can someone please help me out here. Thanks!
This thread has logs
https://www.evolutionm.net/forums/sh...d.php?t=257452
Last edited by Mr. Evo IX; Mar 14, 2007 at 08:30 AM.
#163
Evolving Member
iTrader: (17)
Joined: Oct 2004
Posts: 377
Likes: 0
Received 0 Likes
on
0 Posts
From: San Antonio, TX
I have a question that I haven't been able to find an answer to yet.
I recently had a bunch of new parts installed including some Denso 720cc injectors. I sent my ROM to AMS to have Chris scale the values for the injectors roughly so that I would be able to drive the car until the tuning date at the end of the month.
If I log with either Mitsulogger or Evoscan, will I get accurate readings or is there something that has to be changed in the software to reflect the changes that wree made to my rom for the injectors in EcuFlash?
Sorry if this has been asked before, but I've been searching for over an hour with no luck.
Thanks,
Tony
I recently had a bunch of new parts installed including some Denso 720cc injectors. I sent my ROM to AMS to have Chris scale the values for the injectors roughly so that I would be able to drive the car until the tuning date at the end of the month.
If I log with either Mitsulogger or Evoscan, will I get accurate readings or is there something that has to be changed in the software to reflect the changes that wree made to my rom for the injectors in EcuFlash?
Sorry if this has been asked before, but I've been searching for over an hour with no luck.
Thanks,
Tony
#164
Thread Starter
EvoM Guru
iTrader: (5)
Yes, you need to set the Injector scale and Voltage latency values in mitsulogger, you would get those values from your ECU's rom using ECUFlash.
I am also in the process of getting the load calculation even more accurate by interpolating the 11v and 14v injector latency values.
I am also in the process of getting the load calculation even more accurate by interpolating the 11v and 14v injector latency values.