ECUFlash / Evoscan / Mitsulogger Questions
#601
Hello all, we are having a problem with this:
ending init sequence 1 (0001)
sending init sequence 1 (0003)
sending init sequence 1 (FFFF)
no response to any known code
So I tried (Just in case) with the unlocker running
sending init sequence 1 (0001)
sending init sequence 1 (0003)
sending init sequence 1 (FFFF)
sending init sequence 1 (F0F0)
no response to any known code
I know this has been asked before and we tried keeping the car running, the unlocker, and the 1.41 of ECUflash. We are using the tatrix 2.0 cable and nothing seems to be working with ECUflash.
EVOscan seems to work fine with no issues, so we know the cable, USB port, all hardware can see the ECU okay, we believe it to be a software issue with ECUflash...
Any ideas? Thanks!
Jack
ending init sequence 1 (0001)
sending init sequence 1 (0003)
sending init sequence 1 (FFFF)
no response to any known code
So I tried (Just in case) with the unlocker running
sending init sequence 1 (0001)
sending init sequence 1 (0003)
sending init sequence 1 (FFFF)
sending init sequence 1 (F0F0)
no response to any known code
I know this has been asked before and we tried keeping the car running, the unlocker, and the 1.41 of ECUflash. We are using the tatrix 2.0 cable and nothing seems to be working with ECUflash.
EVOscan seems to work fine with no issues, so we know the cable, USB port, all hardware can see the ECU okay, we believe it to be a software issue with ECUflash...
Any ideas? Thanks!
Jack
If exists somebody which can answer in this question why this tired many people.
Thank you very much and we wait the answer..
Last edited by alatza28; Jun 13, 2009 at 02:44 PM.
#606
Evolving Member
iTrader: (3)
Joined: Mar 2007
Posts: 201
Likes: 0
Received 0 Likes
on
0 Posts
From: MA
question about evoscan or mitsulogger, which one out of the two can use data logging for emissions...well i need readings for no2, o2 being too high. something to prevent me from failing emissions the first time. i also what to know if any of these two softwares allow me to check the obd2 monitor readiness.
#609
Evolved Member
iTrader: (1)
Hey acumus. I've got a question involving the fuel trims. I've tried disabling the immobilizer using the periphery bits, but I'm still reading 0.1008. Is there anything else I'm missing? I've been searching for a couple of hours and came up with nothing, any help would be greatly appreciated.
#611
Can someone please advise me. I have JDM Evo8, Rom ID is 93660005. I am using Ecuflash to download my rom info, it opens without any problems, but when I am trying to save ROM it gives me this error: "There was an error writing this ROM file. See the message log for details." [/I] [21:27:49.625] can't open image file for writing. Any idea why this happens ?
Another thing is I cannot open ROM files, it says There was an error reading this ROM file. See the message log for details, [23:26:41.953] can't open image file.
P.S. This car has been flashed before, unfortunately I dont know what software was used
Another thing is I cannot open ROM files, it says There was an error reading this ROM file. See the message log for details, [23:26:41.953] can't open image file.
P.S. This car has been flashed before, unfortunately I dont know what software was used
Last edited by iggy2009; Jul 7, 2009 at 12:27 PM.
#613
Evolved Member
iTrader: (13)
cannot find a solution to this error, using a netbook with WINXP..
Info: Initialize Vehicle ECU...
Info: Initializing At 5 baud...
Info: Initialization Complete...
Info: Waiting for INIT Response...
Info: ECU ID:
Info: Connection successful...
Error: Object reference not set to an instance of an object.
Info: Datalogger Ended.
Info: Initialize Vehicle ECU...
Info: Initializing At 5 baud...
Info: Initialization Complete...
Info: Waiting for INIT Response...
Info: ECU ID:
Info: Connection successful...
Error: Object reference not set to an instance of an object.
Info: Datalogger Ended.