ECUFlash / Evoscan / Mitsulogger Questions
#661
Evolved Member
iTrader: (4)
Joined: May 2007
Posts: 688
Likes: 0
Received 0 Likes
on
0 Posts
From: Hurlburt Field, FL
does anyone have a problem when they edit the evoscan data file that it doesnt take affect in the program? like I added some new things to log but it doesnt show in the program, and yes I am using gay vista. I am using evoscan v2.6
thanks
thanks
#662
Evolved Member
iTrader: (4)
Joined: May 2007
Posts: 688
Likes: 0
Received 0 Likes
on
0 Posts
From: Hurlburt Field, FL
nevermind I figured it out, I had to move the evoscan program folder from program files x86 to my documents. seems likes under x86 it was read only. I removed it from read only and even as an admin it went back to read only by default when it was under program files x86
Last edited by bnice01; Oct 18, 2009 at 10:19 AM.
#663
Have a few questions or opionions in this case. I bought my car a year ago with everything it has on it now im kinda a noobie but learning much. It is an 03 evo. when i bought it i was running 22 psi with stock piping which it has now but was blowing hose clamps left and right and of course i had a boost leak. I slapped some tbolts on it and nothin is budging until i get hard piping. But i took it for a spin after i put the clamps on and im pullin 25psi...and im not fuel cutting one freakin bit..??? Do you think my ecu was flashed before i got it?
#666
#669
Evolved Member
iTrader: (14)
Ok so any of you guys having issues logging your aem uego with evoscan v2.6? Mine will log for only maybe 30 secs then it freezes the number??? Happens everytime and from my research others have had this problem and had to roll back to v2.5 but I dont know how I tried finding a link on limitless but no dice help!!!!!!
#670
Ok so any of you guys having issues logging your aem uego with evoscan v2.6? Mine will log for only maybe 30 secs then it freezes the number??? Happens everytime and from my research others have had this problem and had to roll back to v2.5 but I dont know how I tried finding a link on limitless but no dice help!!!!!!
If I were you, I would log a support ticket:
http://www.evoscan.org/helpdesk/index.php?a=add
Last edited by SoCal Rally; Nov 15, 2009 at 11:21 AM.
#671
Yes, whatever you program into the ECU's flash memory will still be there if you disconnect and reconnect the battery.
#672
#674
Evolving Member
iTrader: (2)
i am having the exact same problem as above (cant read ecu... the button is greyed out). i could not find a solution by searching. i REALLY need help with this. i never had this problem with my last IX, but i totalled it and now i have a new IX and i need to download the ROM and immobilizer and i cant....
thanks for your help.
Last edited by TurboTylerIX; Nov 24, 2009 at 10:56 PM.
#675
Hi,
I've just begun tuning an Evo6 using of course OpenPort 2.0 cable, Evoscan v2.6 and OpenEcu.
I can read and write the ECU.
I can log datas.
But I can't review my logs using the so cool maptracing mode. After having selected the proper bin file, I no more have any map on the map tracing screen, only grey area.
my rom ID is: 25570000
If it can help, I can enclose both the csv file I've just logged and the map I'm currently using.
What am I supposed to do to have the map tracing working again?
Thx for help!
Jon
I've just begun tuning an Evo6 using of course OpenPort 2.0 cable, Evoscan v2.6 and OpenEcu.
I can read and write the ECU.
I can log datas.
But I can't review my logs using the so cool maptracing mode. After having selected the proper bin file, I no more have any map on the map tracing screen, only grey area.
my rom ID is: 25570000
If it can help, I can enclose both the csv file I've just logged and the map I'm currently using.
What am I supposed to do to have the map tracing working again?
Thx for help!
Jon