ECUFlash / Evoscan / Mitsulogger Questions
#872
#873
Evolving Member
iTrader: (2)
Joined: Oct 2006
Posts: 355
Likes: 0
Received 0 Likes
on
0 Posts
From: Soquel, CA
I need some help, evoscan v2.6 isn't able to log my LC-1 wideband. I can get it to locate it, correct com port. Logworks is logging the LC-1 fine I just can't get the connection to log through evoscan, any ideas?
I also cant seem to get the fuel trims to log anything but 0.1 - I need some ideas for this issue as well.
Thanks
I also cant seem to get the fuel trims to log anything but 0.1 - I need some ideas for this issue as well.
Thanks
#874
#877
Evolved Member
iTrader: (33)
Joined: Oct 2007
Posts: 1,276
Likes: 0
Received 0 Likes
on
0 Posts
From: SoCal/MS
I need some help, evoscan v2.6 isn't able to log my LC-1 wideband. I can get it to locate it, correct com port. Logworks is logging the LC-1 fine I just can't get the connection to log through evoscan, any ideas?
I also cant seem to get the fuel trims to log anything but 0.1 - I need some ideas for this issue as well.
Thanks
I also cant seem to get the fuel trims to log anything but 0.1 - I need some ideas for this issue as well.
Thanks
#878
Evolved Member
iTrader: (33)
Joined: Oct 2007
Posts: 1,276
Likes: 0
Received 0 Likes
on
0 Posts
From: SoCal/MS
evoscan 2.6
baudrate 15625 timeout ms 1000
open port 1.3x
I have a similar problem but i have an AEM wideband serial>usb.
I can log the wide band external but it only reads it for about 5 secs then it stops and freezes on the last afr reading.. evoscan still works fine, only the "external wideband" section locks up.
does anyone one else have this issue?
baudrate 15625 timeout ms 1000
open port 1.3x
I have a similar problem but i have an AEM wideband serial>usb.
I can log the wide band external but it only reads it for about 5 secs then it stops and freezes on the last afr reading.. evoscan still works fine, only the "external wideband" section locks up.
does anyone one else have this issue?
Last edited by kanyonkid; Nov 17, 2010 at 06:41 PM.
#879
Evolving Member
iTrader: (2)
Joined: Oct 2006
Posts: 355
Likes: 0
Received 0 Likes
on
0 Posts
From: Soquel, CA
evoscan 2.6
baudrate 15625 timeout ms 1000
open port 1.3x
I have a similar problem but i have an AEM wideband serial>usb.
I can log the wide band external but it only reads it for about 5 secs then it stops and freezes on the last afr reading.. evoscan still works fine, only the "external wideband" section locks up.
does anyone one else have this issue?
baudrate 15625 timeout ms 1000
open port 1.3x
I have a similar problem but i have an AEM wideband serial>usb.
I can log the wide band external but it only reads it for about 5 secs then it stops and freezes on the last afr reading.. evoscan still works fine, only the "external wideband" section locks up.
does anyone one else have this issue?
same open port cable and v2.6 of evoscan.
I am giving up with the serial-usb signal... I'm going to put one of the analog outs into the ECU and log everything through evoscan.
#883
Evolved Member
iTrader: (34)
Hey guys I'm having trouble with evoscan v2.8. Whenever I log it randomly times out and displays error 'fid' -4 or something similar (definitely -4 though). Same error I get when I try to log my ACD but I'm not sure I have the pins configured for that. I used to log like 7mb files with v2.7 but I remember it used to give me this probably too a couple months before I switched to v2.8. Help??
I'm using tactrix 1.3U and rom 9694011 btw.
Also does anybody else find the scaling on stock MDP to be way off? My evoscan log says 45psi at full boost. Should be more like 15....
I'm using tactrix 1.3U and rom 9694011 btw.
Also does anybody else find the scaling on stock MDP to be way off? My evoscan log says 45psi at full boost. Should be more like 15....
#884
Evolved Member
iTrader: (21)
Joined: Nov 2007
Posts: 857
Likes: 0
Received 0 Likes
on
0 Posts
From: Bakersfield, CA
hey i need help trying to view my log files on windows 7 i have evoscan 2.5 and when i go to the folder where the logs should be at only the sample logs are there but when i use maptracer it shows my logs in that folder
also for some reason evoscan doesnt seem to want to log injector duty%
also for some reason evoscan doesnt seem to want to log injector duty%
Last edited by link62; Dec 18, 2010 at 04:16 PM.
#885
Evolved Member
iTrader: (30)
Joined: Oct 2006
Posts: 780
Likes: 0
Received 0 Likes
on
0 Posts
From: Fl/Jam
hey i need help trying to view my log files on windows 7 i have evoscan 2.5 and when i go to the folder where the logs should be at only the sample logs are there but when i use maptracer it shows my logs in that folder
also for some reason evoscan doesnt seem to want to log injector duty%
also for some reason evoscan doesnt seem to want to log injector duty%
When you go to the map tracer and about to select your log, hit the "up one level" button and see exactly where evoscan is storing those logs. It's suppose to be in the saveddatalogs folder, but it might be located somewhere else.