nothere

iTrader: (23)

mchuang
please excuse the subject departure,

could you help me find the 94170008 that has been documented?

and an idea on where to start, I'd like to see what you smart fellows have developed.
afraid I'm a bit of a point and click type guy, so speak simply please.

mchuang

iTrader: (11)

www.Aktivematrix.com MalibuJack has the same rom and that rom is being disassembled since it is the original.
http://www.aktivematrix.com/forum/viewtopic.php?t=20

also search for 2byte load in the past 2 pages of ecuflash portion of this forum

phenem

iTrader: (39)

Any more info on the 2-byte load / RPM?

I really want to get this working on my ROM, I have no idea what I need to be looking for or I would help.

I have a degree in CS so if anyone can point me in the right direction that would be great! Seems like we have found the MUT table now we need to find the address for LOAD and RPM.......

~Z

burgers22

Hi

Using John Banks method from Load limit, you should be able to change MUT00 to 895C hex and MUT01 to 895D hex. Thats 35164 and 35165 decimal. Let me know how that looks when logging.

Most of the disassembly work can be found at Aktive Matrix.

MB

mchuang

iTrader: (11)

Burgers it worked bro, thx for the help. So it seems that 94170008 and 94170014 have the same 2byteload. I tested it and the 2byte load was dead on with the ecuload. The calculated load was slightly higher as everyone else has noticed.

phenem

iTrader: (39)

Burgers,

Thanks for the help, I was going to try the same load bytes in the 94170008 ROM but I was hesitant, it seems mchuang got it to work though...great work guys!

What about 2byte RPM? Any word on that?

~Zach