PATCH: NLTS + Valet + KnockCEL
Sep 28, 2007, 07:55 AM
#243
Evolving Member
iTrader: (11)
Join Date: Jan 2005
Location: DFW
Posts: 407
Likes: 0
Received 0 Likes
on
0 Posts
this might be just me but has anyone noticed that when you step on the clutch your bov goes off and then when you let off the clutch the bov goes off again?
so you hear it twice within a second......
weird!!!!!!
so you hear it twice within a second......
weird!!!!!!
Sep 28, 2007, 08:02 AM
#246
Evolved Member
iTrader: (37)
Join Date: Sep 2003
Location: Spec-Ops Motorsports, Fayetteville, NC
Posts: 3,146
Likes: 0
Received 2 Likes
on
2 Posts
Curiosity strikes....
can someone post the settings you are using for these rom changes so i can get a ballpark figure for each as to where i should be starting at... thanks guys.
also, im getting a number in the areas where i think it should be a yes or no. under tephra mod options im getting 65535, and just about everywhere there is a value that is what i see.
tephra, i will be shooting you some cash shortly, thanks for all you do
can someone post the settings you are using for these rom changes so i can get a ballpark figure for each as to where i should be starting at... thanks guys.
also, im getting a number in the areas where i think it should be a yes or no. under tephra mod options im getting 65535, and just about everywhere there is a value that is what i see.
tephra, i will be shooting you some cash shortly, thanks for all you do
Last edited by bigric09; Sep 28, 2007 at 08:04 AM.
Sep 28, 2007, 08:06 AM
#248
My settings:
TPS - 98%
Speed - 30km/h
RPM Drop - 1000
C6 - Either
I am going to look at the top clutch switch this weekend see what I can do to extend it... it really needs to "activate" just before the grab point of the clutch which is about 5cm down, rather than 1cm down...
TPS - 98%
Speed - 30km/h
RPM Drop - 1000
C6 - Either
I am going to look at the top clutch switch this weekend see what I can do to extend it... it really needs to "activate" just before the grab point of the clutch which is about 5cm down, rather than 1cm down...
Sep 28, 2007, 08:09 AM
#249
Evolved Member
iTrader: (37)
Join Date: Sep 2003
Location: Spec-Ops Motorsports, Fayetteville, NC
Posts: 3,146
Likes: 0
Received 2 Likes
on
2 Posts
mine i set at
tps - 95
speed - 56
rpm drop - 1500
tephra, or anyone, when you get a sec, can you explain why im getting those 65535 numbers in the tephra mod enable disable column ? what should it be for on and off ?
tps - 95
speed - 56
rpm drop - 1500
tephra, or anyone, when you get a sec, can you explain why im getting those 65535 numbers in the tephra mod enable disable column ? what should it be for on and off ?
Sep 28, 2007, 08:09 AM
#250
Evolving Member
iTrader: (9)
Join Date: Apr 2006
Location: MA
Posts: 369
Likes: 0
Received 0 Likes
on
0 Posts
Donation sent!
I'm going to try the V2 on my ROM and patch it all again to see if it will solve my issue with the bogging.
My logs showed that with the stock (My existing tuned ) rom I wasn't knocking for the first few gears, but when I used the patched rom it gave me up to 4 counts of knock on 1st and 2nd gear....
I'm going to try the V2 on my ROM and patch it all again to see if it will solve my issue with the bogging.
My logs showed that with the stock (My existing tuned ) rom I wasn't knocking for the first few gears, but when I used the patched rom it gave me up to 4 counts of knock on 1st and 2nd gear....
Sep 28, 2007, 08:13 AM
#252
Evolved Member
iTrader: (37)
Join Date: Sep 2003
Location: Spec-Ops Motorsports, Fayetteville, NC
Posts: 3,146
Likes: 0
Received 2 Likes
on
2 Posts
i am using the 88590015 rom, i always have...
i was suppose to copy the table additions to my 88590015 xml im using already correct ? i added them to the end, just about the >rom line or whatever the last one is.
i was suppose to copy the table additions to my 88590015 xml im using already correct ? i added them to the end, just about the >rom line or whatever the last one is.
Sep 28, 2007, 08:13 AM
#253
You need to use the 88590015 rom file thats been uploaded here
Sep 28, 2007, 08:14 AM
#255