chaz517

bescause of al at dynoflash i cant do this. i uploaded my rom, and 1st of all it says 2004 when its an 05, and all my maps say INF or have crazy numbers, i tried ecu unlock buti cant do ****.so i cant transfer my maps to tephras, and cant even get the correct immbolizer code i dont think. it read 4201. no letters or anything. i cant even get 4201 to come up on tephras map under immobilizer code.

Ralph

iTrader: (19)

You are probably using the wrong definition file.

chaz517

mellon tried to open it as well and no luck. any ideas on what i can try and how to do that? thanks i appreciate it alot

mplspilot

iTrader: (7)

That's because he changed your rom id. You will need to change it back to what it should be through a hex editor. You will need to find out what the correct rom id for your car is and put it in the following address: F52.

chaz517

ok i will DL a hex editor and do that. where is the f52 address? how do i do that part? again i appreciate this sooo much, im not too happy with al

mplspilot

iTrader: (7)

So about the RPM drop talk.... I got mine set at 500 rpms and i hit the limiter sometime when i shift slowly. But isn't bouncing on that limiter kind of good, cause it keeps the boost up? (i had no KC on my log when that happened)

l2r99gst

iTrader: (2)

Your ROM ID should be 96940011

chaz517

so if i change that it will work? how do i change that though? although i did just talk to al and he said he will fix it later. so kudos to him. but in the mean time i wanna see if this stuff works lol, thanks for the help so far

mplspilot

iTrader: (7)

^ no , it won't work. we're just kidding...... Of course it will!
Get a hex editor, you'll see what's what. If you don't, ask then.

chaz517

loll got some wiseguys up in here lol its all good. a downloaded a hex editor and i opened the rom and it was all a bunch of letters and numbers and weird stuff so im gonna try a differen tprogram

chaz517

i think i just dont know wtf i am looking at on this hex editor its confusing the crap ouuta me.. not literally tho lol

tkklemann

iTrader: (6)

Is anyone having difficulty logging with EvoScan after loading these patches into their respective ECU's?

EvoScan wiggs out everytime I try to log with the patch.

When I re-load my ROM prior to loading in the patch, EvoScan works fine.

Any suggestions? I would like to not have to load an old ROM everytime I want to log..

ohthree

iTrader: (1)

if i already have a prexisting flash from a vendor, what parts of the flash should i add to the roms that tephra offers? fuels, etc? could someone make a list? in my free time this week im going to run through and copy the obvious values and work out the kinks. any help would be greatly appreciated though! thanks.

tom.

kreionic

iTrader: (14)

Everything logs fine for me with the evoscan

Charlie_B

iTrader: (1)

^^ Same here.