PATCH: NLTS + Valet + KnockCEL
Nov 20, 2007, 09:02 PM
#861
250 RPMS? For the NLTS? I am not sure of the settings, like I figured I should make it fall to what, 5 grand for the six speed? What each box is? What miliseconds per count of knock.
That kinda stuff, I just need a tutorial on the actual settings and how I can get them to work.
That kinda stuff, I just need a tutorial on the actual settings and how I can get them to work.
Nov 20, 2007, 10:25 PM
#862
Newbie
Join Date: Nov 2005
Location: Sydney, Australia
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
check the first post it explains it a bit ... but basically the NTLS has a few settings
- NTLS TPS Threshold (Sets the threshold for the throttle position (in %) i.e if you want it to activate when you have the throttle pushed over half way you would set it to 50% most people find 90% and above doesnt interfear with normal driving (I have mine set to 97% so NTLS only works when on full gas)
- NTLS Speed Threshold (Sets the minimum speed you have to be going before NTLS will be enabled, most including me have it set to about 30kmph so you are able to take off and launch normally)
- NTLS RPM Drop (determins how much the revs will drop by when the clutch is depressed i.e if this was set to 1000 you are at 6000 revs and the above 2 conditions are met and you push the clutch in it will drop to 5000 and hold it there until you let the clutch back out), I have mine set to 1500 on the 6 spd.
The defaults on the knock sum work well and the CEL light will flash when a knock count of 4 or more is detected and you have 150% load.
Valet mode is described quite well in the first page, hope that helps ya!
- NTLS TPS Threshold (Sets the threshold for the throttle position (in %) i.e if you want it to activate when you have the throttle pushed over half way you would set it to 50% most people find 90% and above doesnt interfear with normal driving (I have mine set to 97% so NTLS only works when on full gas)
- NTLS Speed Threshold (Sets the minimum speed you have to be going before NTLS will be enabled, most including me have it set to about 30kmph so you are able to take off and launch normally)
- NTLS RPM Drop (determins how much the revs will drop by when the clutch is depressed i.e if this was set to 1000 you are at 6000 revs and the above 2 conditions are met and you push the clutch in it will drop to 5000 and hold it there until you let the clutch back out), I have mine set to 1500 on the 6 spd.
The defaults on the knock sum work well and the CEL light will flash when a knock count of 4 or more is detected and you have 150% load.
Valet mode is described quite well in the first page, hope that helps ya!
Last edited by kayman; Nov 20, 2007 at 10:27 PM. Reason: visual
any update on 93660005 Dave??
Nov 28, 2007, 12:09 PM
#865
I have tried 88590014 on my vista laptop a recieved a "unkown rom image" I then try loading on my XP personal computer same thing??? I have tried loading 015 in my car and it does not start? And yes I changed the immobilizer. Is it Vista related? Any help will be great!!!
Nov 28, 2007, 03:05 PM
#868
Newbie
Join Date: Nov 2005
Location: Sydney, Australia
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
if you tried it on xp and got the same error then it kind of rules out being a vista problem yeah? Try download it again it could have got corrupted during download and make sure you have the appropriate xml file as Tephra suggests above.