PATCH: NLTS + Valet + KnockCEL
#871
Newbie
Join Date: Nov 2005
Location: Sydney, Australia
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
seeing as 014 doesnt work on vista or xp it seems like there is something wrong with that ROM and doesnt relate to your operating system unless 015 works on XP and not on Vista then it gets a bit strange.
What version of ECUFlash are you using? and what is your actual ECU 014 or 015?
#874
Newbie
Join Date: Nov 2005
Location: Sydney, Australia
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
maye try using the latest ECUFlash and try download the existing ROM on your ECU and then write the same ROM back without changing anything to see if it works. I'm pretty sure ECUFlash works fine with Vista but maybe you need the latest ver.
Edit: if u can see the mod but the numbers are skewed with your ROM its most likely that you have done the editing correctly, Tephra can confirm this
Edit: if u can see the mod but the numbers are skewed with your ROM its most likely that you have done the editing correctly, Tephra can confirm this
Last edited by kayman; Nov 28, 2007 at 03:56 PM.
#876
Newbie
Join Date: Nov 2005
Location: Sydney, Australia
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
i just did a find and replace in notepad or you can look for a newer xml definition for your file
do a replace for endian="little" to endian="change2big"
then
do a replace for endian="big" to endian="little"
then
do a replace for endian="change2big" to endian="big"
otherwise your going to have to manually go thru and do em.
do a replace for endian="little" to endian="change2big"
then
do a replace for endian="big" to endian="little"
then
do a replace for endian="change2big" to endian="big"
otherwise your going to have to manually go thru and do em.
Last edited by kayman; Nov 28, 2007 at 04:27 PM. Reason: explained better
#880
Ive tried to use this patch a few times... but it never seems to work out for me in the end. I dont understand why though.
The last time I tried to use it, The NLTS wouldn't work in first gear... I left all the setting the same as when I input it. And I revved first gear all the way to red line... I'd mash the clutch....and its bounce of my 7800 rev limiter anyway.... Can someone help me out with this? Track days tomarrow and I'm hoping to have this on and working by then.
The last time I tried to use it, The NLTS wouldn't work in first gear... I left all the setting the same as when I input it. And I revved first gear all the way to red line... I'd mash the clutch....and its bounce of my 7800 rev limiter anyway.... Can someone help me out with this? Track days tomarrow and I'm hoping to have this on and working by then.
#881
Newbie
Join Date: Nov 2005
Location: Sydney, Australia
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
NTLS has a speed threshold which by default is set to 30km/hr which means you need to be above that speed to trigger it.
have a read of the first post it has a method / settings to test it.
have a read of the first post it has a method / settings to test it.